Polungsprüfer [Polarity Tester] EMT 160-1 + EMT160-2

Elektromesstechnik Wilhelm H. Franz K.G. (EMT); Lahr

  • Year
  • 1965 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 283065
    • alternative name: FRANZ Vertriebsges. mbH

 Technical Specifications

  • Number of Transistors
  • 11
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Dry Batteries / 1 x 9 & 2 x 4.5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5 cm = 2 inch
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Polungsprüfer [Polarity Tester] EMT 160-1 + EMT160-2 - Elektromesstechnik Wilhelm H.
  • Shape
  • Miscellaneous shapes - described under notes.
  • Dimensions (WHD)
  • 217 x 110 x 57 mm / 8.5 x 4.3 x 2.2 inch
  • Notes
  • Audio signal polarity tester. EMT160-1 sends a pulse when trigger knob is released, and EMT160-2 detects the polarity of this pulse (positive or negative, red or green lamp). 

    EMT160-1 uses one 9V battery and a capcitor to generate pulses. Acoustic pulse can be generated for microphone testint. 

    EMT160-2 is powered by 2 x 4.5V flashlight batteries. 

    EMT 161 preamplifier can be plugged into the slot on top of the EMT160-2 unit. This preamp has built-in microphone or it can be connected to an external dynamic microphone for loudspeaker polarity testing. This preamplifier is powered by the EMT160-2 unit

  • Mentioned in
  • - - Manufacturers Literature (EMT catalogue 1968, page 71-72)
  • Author
  • Model page created by Matti Adolfsen. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Polungsprüfer [Polarity Tester] is part of the collections of the following members.

 Forum