Stereo Amplifier SA-800

Pioneer Corporation; Tokyo

  • Year
  • 1971/1972
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 150853

 Technical Specifications

  • Number of Transistors
  • 35
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 110/120/130/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 68 W (165 W max.)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Stereo Amplifier SA-800 - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 145 x 337 mm / 16.9 x 5.7 x 13.3 inch
  • Notes
  • A hi-fi stereo integrated amplifier housed in a wooden case with continuous power output of 2 x 34 watts into 8 ohms or 2 x 39 watts into 4 ohms. With wide power bandwidth. Power and preamplifier sections can be separated. Optional phono input transformer PP-402 required for MC cartridge. Terminals for 2 pairs of loudspeakers and centre channel terminal for connection to mono tape recorder.

    Stereo-Vollverstärker mit 2 x 39 Watt Sinus an 4 Ohm. 35 Transistoren, 2 FET's, 20 Dioden.

    Specification  
    POWER AMPLIFIER SECTION  
    Continuous Power Output
    (both channel driven)
    39W + 39W into 4Ω
    34W + 34W into 8Ω
    Music Power Output (IHF) 165 Watts into 4Ω
    108 Watts into 8Ω
    Harmonic Distortion < 0.5% (Continuous power output)
    Intermodulation Distortion < 0.5% (Continuous power output)
    Power Bandwidth (IHF) 5Hz — 50kHz
    (8Ω, Harmonic Distortion <0.5%)
    Frequency Response 5Hz — 80kHz ±1dB
    Input Sensitivity/Impedance
    (1kHz, Continuous power output)
    560mV/100kΩ
    Speakers 4 — 16Ω
    Damping Factor > 65 (8Ω, 1kHz)
    Center Channel Output 500mV
    PREAMPLIFIER SECTION  
    Output Voltage 3V (Rated output), 5V (Max.)
    Harmonic Distortion < 0.1%
    Frequency Response 20Hz — 60kHz ±1dB
    Input Sensitivity/Impedance
    (1kHz, for rated output)
     
     PHONO 1. MAG 3mV/50kΩ
    CER 56mV/100kΩ
     PHONO 2. MM 3mV/50kΩ
    MC 110µV/30Ω (with PP-402)
     MIC
     TUNER
     AUX 1, 2
     TAPE MONITOR 1, 2
    2.3mV/50kΩ
    230mV/200kΩ
    230mV/200kΩ
    230mV/200kΩ
    Recording Output  
     TAPE REC 1, 2 (Pin jack)
     TAPE REC (DIN connector)
    230mV
    35mV
    Equalization Curve PHONO: RIAA
    LOW Filter
    HIGH Filter
    -3.5dB/60Hz (12dB/oct.)
    -3dB/6kHz (12dB/oct.)
    Muting  -20dB
    Channel Separation (1kHz)  
     PHONO
     TUNER, AUX
    > 50dB
    > 55dB

    Semiconductors:   35 Transistors, 2 FETs, 20 Diodes

    Versions/Power requirements
    KUW USA  /  120V AC 60Hz
    KCW Canada  /  120V AC 60Hz
    FVW General Export  /  110/120/130/220/240V AC 50/60Hz with voltage selector

    Power consumption:  230 watts max.

  • Net weight (2.2 lb = 1 kg)
  • 10.3 kg / 22 lb 11 oz (22.687 lb)
  • Source of data
  • -- Original prospect or advert
  • Mentioned in
  • - - Manufacturers Literature (1972 Pioneer Stereo Components catalogues)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual Pioneer SA-800 dated 1971)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Operating Instructions Pioneer SA-800)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum