• Country
• Japan

• Manufacturer / Brand
• Sansui Electric Co., Ltd.; Tokyo

• Year
• 1973/1974

• Category
• Audio Amplifier or -mixer

• Radiomuseum.org ID
• 81247

Click on the schematic thumbnail to request the schematic as a free document.

• Number of Transistors
• 18

• Semiconductors

• Main principle
• Audio-Amplification

• Details
• Hi-Fi equipment

• Power type and voltage
• Alternating Current supply (AC) / 110; 117; 220; 240 Volt

• Loudspeaker
• - This model requires external speaker(s).

• Power out
• 30 W (36 W max.)

• Material
• Various materials

• from Radiomuseum.org
• Model: Solid State Stereo Amplifier AU-101 - Sansui Electric Co., Ltd.;

• Shape
• Book-shelf unit.

• Dimensions (WHD)
• 407 x 115 x 278 mm / 16 x 4.5 x 10.9 inch

• Notes

• A hi-fi stereo integrated amplifier housed in a metal case with wooden side panels with continuous power output of 2 x 15 watts into 8 ohms or 2 x 18 watts into 4 ohms. With rotary Power on/off switch, rotary Bass, Treble, Balance and Volume controls, rotary Selector switch (Mic, Phono, Aux), on/off switches for Speakers and Loudness, Tape Monitor switch (Source, Playback) with DIN socket, and jacks for Headphones and Microphone. On the back, Ground terminal, RCA phono sockets for input Phono and Aux, for Tape Rec and Play, terminals for 1 pair of loudspeakers and 1 switched and 1 unswitched AC outlet.

  Specification
  POWER OUTPUT
  MUSIC POWER (IHF)	50W into 4Ω, 44W into 8Ω
  CONTINUOUSE POWER	18+18W into 4Ω load 15+15W into 8Ω load
  THD	< 0.8% at rated output
  POWER BANDWIDTH (IHF)	25-40,000Hz
  FREQUENCY RESPONSE	20-60,000Hz ±2dB
  CHANNEL SEPARATION  (at 1,000Hz, rated output)	PHONO: > 45dB,  AUX: > 45dB
  HUM AND NOISE (IHF)	PHONO: > 65dB,  AUX: > 75dB
  INPUT SENSITIVITY (at 1,000Hz)
  PHONO  MIC (MONO)  AUX  TAPE MON (pin)  TAPE RECORDER (DIN)	3mV (50kΩ) 4mV (50kΩ) 200mV (50kΩ) 200mV (50kΩ) 200mV (50kΩ)
  RECORDING OUTPUT
  TAPE REC (pin)  TAPE RECORDER (DIN)	200mV 30mV
  LOAD IMPEDANCE	4 to 16Ω
  EQUALIZER PHONO	RIAA NF type, MIC: flat NF type

  Semiconductors: Transistors; 18, Diodes; 4
  Power Requirements: 100, 117, 220, 240V AC 50/60Hz with voltage selector
  Power Consumption:  30W (rated)

• Net weight (2.2 lb = 1 kg)
• 5.9 kg / 12 lb 15.9 oz (12.996 lb)

• Literature/Schematics (1)
• - - Manufacturers Literature (Operating Instructions and Service Manual Sansui AU-101)

• Author
• Model page created by Peter Böhm. See "Data change" for further contributors.

• Other Models

• Here you find 417 models, 403 with images and 130 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
  All listed radios etc. from Sansui Electric Co., Ltd.; Tokyo