Trigger/Phase Lock VCG 115

Wavetek Corporation; San Diego (CA)

Data
Forum
Pictures
Collections

  • Year
  • 1967 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 259458

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • none
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 105-125; 200-250 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Trigger/Phase Lock VCG 115 - Wavetek Corporation; San Diego
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 7.75 x 5.25 x 11.5 inch / 197 x 133 x 292 mm
  • Notes

  • Triggered or Phase Lock VCG (Voltage Controlled Generator)

    Waveforms: Sine, Square, Triangle, Ramp
    Frequency Range: 0.0015Hz to 1Mhz in 16 ranges
    Output Impedance: 50 Ω (600 Ω available by removing one jumper wire)
    Output Level: at least 10 volts peak peak into 50 Ω
    Short Cicuit Current: ±100mA

    Trigger
    Input Impedance: 10 kΩ
    Trigger Mode: Manual or external voltage ±0.5 volts
    Gated Mode: Discrete number of cycles may be generated by application of ±0.5 volts gate.

    VCG Voltage Controlled Generator
    Over 20:1 frequency ratio (selectable in ranges of 3:1 allowing excellent range overlap). 4.75 volts input for 20:1 frequency ratio.

    Phase Lock
    Frequency Range: 10 Hz to 1 Mhz.
    Input amplitude requirements are minimum 800mV peak peak to lock and 5Volt peak to peak sine wave for specified accuracy.
    An input of 100V will not damage circuitry.


     

  • Net weight (2.2 lb = 1 kg)
  • 10 lb 0 oz (10 lb) / 4.540 kg
  • Mentioned in
  • -- Original-techn. papers.
  • Author
  • Model page created by Pius Steiner. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Trigger/Phase Lock VCG is part of the collections of the following members.

 Forum