• Year
  • 1960/1961
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 29757

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 10
  • Main principle
  • Superheterodyne (common); ZF/IF 452/10700 kHz; 2 AF stage(s)
  • Tuned circuits
  • 6 AM circuit(s)     10 FM circuit(s)
  • Wave bands
  • Broadcast, Long Wave, Short Wave plus FM or UHF.
  • Power type and voltage
  • Alternating Current supply (AC) / 110; 127; 145; 165; 220; 245 Volt
  • Loudspeaker
  • 2 Loudspeakers / Ø 18 cm = 7.1 inch
  • Power out
  • 12 W (unknown quality)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: B6X04A /00 - Philips Belgium Belgien
  • Shape
  • Tablemodel with Push Buttons.
  • Dimensions (WHD)
  • 600 x 289 x 258 mm / 23.6 x 11.4 x 10.2 inch
  • Notes
    • This radio has 3 tone control preselections.
    • The tuner part is mono, the output amplifier is stereo.
    • When playing radio (any wave band), one output channel plays full range, the other has a low pass filter and plays not as loud. This is intended by Philips; don't mistake this behavior as an amplifier problem. Both channels only play full range when playing PU or tape and the stereo button is engaged.
    • Both tone control potentiometers will only work when none of the tone control preselections are engaged.
    • Lautsprecher 800 Ohm über Trafo; keine eisenlose Endstufe!
    • Loudspeakers are model AD3800AM (800Ω); no transformerless output.
    • 2 extra output connectors for external speakers, both with a full range and a high pass output.
  • Literature/Schematics (1)
  • -- Original-techn. papers.
  • Author
  • Model page created by Iven Müller. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model is part of the collections of the following members.

 Forum