Need for help - Telefunken 8001WK
ID: 109248
Need for help - Telefunken 8001WK
12.Apr.06 16:08
0

Dear colleaques, please for help. I need for service documentatios about radio set
I have radio schemat, need for all kinematic and others information.
Maybe who know internet site about it ?
Promis to help with Soviet union or Russia radio sets documentation
Best Regards from Lithuania
Telefunken Spitzen-Super 8001WK
http://www.radiomuseum.org/r/telefunken_spitzen_super_8001wk.htmlI have radio schemat, need for all kinematic and others information.
Maybe who know internet site about it ?
Promis to help with Soviet union or Russia radio sets documentation
Best Regards from Lithuania
To thank the Author because you find the post helpful or well done.
Some hints in Model's page
12.Apr.06 17:15

Hello from Portugal,
I didn't understand what you need. You said that you have already the schematic .
In case you have problems with scale rope I tried to translate to English this text (in Altavista without modify) from an article of Andreas Steinmetz at(25.01.2005).(This article is written in German at the botton of this model's page.)
"I would like to give the following important repair hints: 1. Before the chassis development the pointer of scale must be absolutely loosened from the scale rope, otherwise the scale rope tears up. Position in addition the pointer of scale in such a way that one can reach and so far loosen the screw at the pointer of scale from down that the scale rope arrives laterally from wedging. Much place is not there, and a flashlight can be very helpful. 2. In addition the wiring harness and a few individual cables between chassis and front frameworks must be unsoldered before the chassis development. Takes place best at the collecting tag board under the chassis as well as at the connections of the individual cables at that the front framework turned away side. Make in addition sketches or the veins mark. The chassis can be taken without the wiring harness in enterprise. Possibly a bridge at the collecting tag board is necessary for the full function (EM 11) (see connection diagrams)."
I hope it helps you
Best Regards
Mário Coelho
I didn't understand what you need. You said that you have already the schematic .
In case you have problems with scale rope I tried to translate to English this text (in Altavista without modify) from an article of Andreas Steinmetz at(25.01.2005).(This article is written in German at the botton of this model's page.)
"I would like to give the following important repair hints: 1. Before the chassis development the pointer of scale must be absolutely loosened from the scale rope, otherwise the scale rope tears up. Position in addition the pointer of scale in such a way that one can reach and so far loosen the screw at the pointer of scale from down that the scale rope arrives laterally from wedging. Much place is not there, and a flashlight can be very helpful. 2. In addition the wiring harness and a few individual cables between chassis and front frameworks must be unsoldered before the chassis development. Takes place best at the collecting tag board under the chassis as well as at the connections of the individual cables at that the front framework turned away side. Make in addition sketches or the veins mark. The chassis can be taken without the wiring harness in enterprise. Possibly a bridge at the collecting tag board is necessary for the full function (EM 11) (see connection diagrams)."
I hope it helps you
Best Regards
Mário Coelho
To thank the Author because you find the post helpful or well done.
18.Apr.06 16:36


Very thanks to Mario,
Question is about connection schemat -- for circuit (frequency) control
This is a photo down of T 8001 WK. Must be rope - but I dont know where....
More photos here.. http://zenonas.langaitis.fotopic.net/c928280.html
Please send me photo down of Telefunken 8001WK, who have that radio set.
now I try in germany... :-)
WELCH DRAHTSEIL KURS UNTER KONTUR ?
Thank you
To thank the Author because you find the post helpful or well done.
Who knows this radio?
19.Apr.06 23:38

Dear Langaitis,
I've not this radio. Perhaps Mr. Andreas Steinmetz, who wrote the article about how to disassembling it, can help you.Try to contact him. Maybe he know also your problem.
In his profile I got this adress:
a.steinmetz@fh-osnabrueck.de
Best Regards
Mário Coelho
To thank the Author because you find the post helpful or well done.
19.Apr.06 23:53
Hello Zenonas,
I would like to help you though it is not easy for me to describe the asked things in english. Perhaps it is necessary to draw a picture, too, and that will take some time. Please excuse me, but at the moment I don´t have much time for these interesting things...
But first: Could you please start a new need-for-help-thread at the model itself? There the answers will not disappear in the RMorg archive after a short period. The problems which you have with your radio are quite typical for this model-family, and so I am shure that I can help many collectors at the same time.
Regards from Germany
Andreas Steinmetz
I would like to help you though it is not easy for me to describe the asked things in english. Perhaps it is necessary to draw a picture, too, and that will take some time. Please excuse me, but at the moment I don´t have much time for these interesting things...
But first: Could you please start a new need-for-help-thread at the model itself? There the answers will not disappear in the RMorg archive after a short period. The problems which you have with your radio are quite typical for this model-family, and so I am shure that I can help many collectors at the same time.
Regards from Germany
Andreas Steinmetz
To thank the Author because you find the post helpful or well done.
20.Apr.06 10:15

Thanks for Mario and Andreas. I hope for the best..
OK, I open new thread in model 8001WK site forum..
Best Regards to radio colleaques
Zenonas
Lithuania
OK, I open new thread in model 8001WK site forum..
Best Regards to radio colleaques
Zenonas
Lithuania
To thank the Author because you find the post helpful or well done.