radiomuseum.org
 
  La valutazione del thread riflette la votazione dell'articolo migliore. Hai votato questo thread?

Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960

Moderatori:
Ernst Erb Otmar Jung 
 
Per saperne di più, clicca sul pulsante blu d'aiuto.
Documenti » Valvole e tubi (storia, tecnica, ecc.) » Rod Tubes - Principle and Design - Sukhanov, Kireev - 1960
           
Joe Sousa
Joe Sousa
Redattore
USA  Articoli: 662
Schemi: 214
Foto: 434
12.Oct.11 05:07
 
Nr. ringraziamenti: 13
Rispondi  |  Devi effettuare l'accesso (Ospite)   1

Fellow Radiophiles:

RM member Dmitri Faguet and I have finished the English translation of the first Russian Rod Tube article that appeared in the popular electronics hobby press in the Soviet Union. This article was originally published in Russian in "Radio" magazine 1960 issue no. 7 pp34-38.

See the attached pdf file.

The benefits of beam focus to keep current out of the screen grid rods are explained. Partition noise is thus reduced by over 2x, and so is wasted current on the screen grid to less than 10% of the anode current. The most efficient of the rod tubes, the 1j24b, only wastes 2% of the Anode current on the screen grid rods.

Best Regards,

-Joe

Allegati:

Questo articolo è stato modificato il 25.Jan.22 04:32 da Joe Sousa .

  
rmXorg