admiral: Schematic error?

ID: 525943
admiral: Schematic error? 
15.Jun.19 21:17

Michael Saija (USA)
Articles: 3
Count of Thanks: 4

The 50L6 tube has NO number 1 pin.  The schematics show a 150 ohm resistor from pin 1 to chassis ground however in reality ( and it shows on the Sams photo's) the number 1 position on the socket is grounded to chassis. The 150 ohm resistor actually goes from the #8 pin to the #1 pin socket position and thence to chassis ground. 

To thank the Author because you find the post helpful or well done.