radiomuseum.org

gonset: Transmitter Input power versus output.Gonset Commander II

Moderatoren:
Martin Renz Ernst Erb Vincent de Franco Martin Bösch Mark Hippenstiel Bernhard Nagel Dietmar Rudolph Otmar Jung Heribert Jung Eilert Menke 
 
Bitte klicken Sie ganz oben rechts das blaue Info-Zeichen, um Instruktionen/Hilfe zu erhalten.
Forum » Apparate: Physik - Radios - bis TV » MODELLE IM RADIOMUSEUM » gonset: Transmitter Input power versus output.Gonset Commander II
           
Rich Post
 
 
USA  Beiträge: 13
Schema:
Bilder: 816
06.Jun.21 21:20
Antworten  |  Sie sind nicht eingeloggt (Gast).   1

Transmitter power for older tube type units is typically expressed as input power.  Output is dependent on many factors including transmission type, amplifier class and efficiency, and frequency.  Power output and efficiency of a Class C transmitter such as the Gonset Commander II is about 2/3 of input power as a rule of thumb maximum.  The Commander, like most such transmitters if run at the highest power input  requires a separate B plus voltage for its oscillator, 300 volts in this case and often voltage controlled.  The final section can be run at either the same 300 or a higher voltage for maximum power input.

  
rmXorg