Konzertgerät 5088
Grundig (Radio-Vertrieb, RVF, Radiowerke)
- Pays
- Allemagne
- Fabricant / Marque
- Grundig (Radio-Vertrieb, RVF, Radiowerke)
- Année
- 1957/1958
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 21142
-
- alternative name: Grundig Portugal || Grundig USA / Lextronix
ebay
�
Gerät in Betrieb
Grundig 5088
Gerät in restauriertem Zustand, spielt
Linke Geräteseite
Seriennummer am Chassis
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 8
- Principe général
- Super hétérodyne (en général); FI/IF 460/10700 kHz; Reflex
- Circuits accordés
- 7 Circuits MA (AM) 11 Circuits MF (FM)
- Gammes d'ondes
- PO, GO, OC et FM
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110; 125; 160; 220 Volt
- Haut-parleur
- 4 HP
- Puissance de sortie
- 7 W (qualité inconnue)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: Konzertgerät 5088 - Grundig Radio-Vertrieb, RVF,
- Forme
- Modèle de table avec boutons poussoirs.
- Dimensions (LHP)
- 670 x 400 x 290 mm / 26.4 x 15.7 x 11.4 inch
- Remarques
-
Drehbare Ferritantenne, Wunschklang-Register, Gegentakt-Endstufe.
Bei UKW wird die HF-Vorstufe in Reflexschaltung auch als erste FM-ZF-Stufe verwendet, das ergibt insgesamt 3 FM-ZF-Stufen.
Rückwandangabe 8 AM- und 13 FM-Kreise ist (werbewirksam) falsch.
- Poids net
- 16.9 kg / 37 lb 3.6 oz (37.225 lb)
- Prix de mise sur le marché
- 448.00 DM
- Source extérieure
- Erb
- Schémathèque (1)
- -- Original-techn. papers.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 6196 modèles d'appareils, 5420 avec des images et 4190 avec des schémas.
Tous les appareils de Grundig (Radio-Vertrieb, RVF, Radiowerke)
Collections
Le modèle Konzertgerät fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: Grundig Radio-: Konzertgerät 5088
Discussions: 1 | Publications: 16
Gentlemen,
I am restoring a Grundig 5088 USA model and need some help with my first non-US radio restoration. I am using a schematic found at www.rad-io.de I have found it to be mostly accurate except for some of the audio frequency circuit architecture. There are differences.
A friend of the family has translated most of the words. So my questions are with the missing information below:
The resistors have the resitance printed on the body and a single color band on one end. What does this band represent and what are the values of the colors?
I have identified three types of fixed capacitors; Paper (Papier), Syrofome (Styrofier?) and Ceramic/mica (Keromic?). However, there are some paper capacitors that have a plastic like blue coating. The schematic clearly identifies these as paper. Is there more to these capacitors? Are they special (i.e., inverse temperature, resonant) capacitors?
Once I have replaced all of the paper and electrolytic capacitors (and the occational off tolerance resistor) RF alignment is next. The IF frequencies (10.7/460) and the transformers are identified. However, there are plenty of other adjustments with no explanation. Where might I find the alignment procedures?
Please forgive me if this information is readily available on the internet. If so, then please recomend an appropriate web site.
Thank you in advance for your time,
Paul.
I am restoring a Grundig 5088 USA model and need some help with my first non-US radio restoration. I am using a schematic found at www.rad-io.de I have found it to be mostly accurate except for some of the audio frequency circuit architecture. There are differences.
A friend of the family has translated most of the words. So my questions are with the missing information below:
The resistors have the resitance printed on the body and a single color band on one end. What does this band represent and what are the values of the colors?
I have identified three types of fixed capacitors; Paper (Papier), Syrofome (Styrofier?) and Ceramic/mica (Keromic?). However, there are some paper capacitors that have a plastic like blue coating. The schematic clearly identifies these as paper. Is there more to these capacitors? Are they special (i.e., inverse temperature, resonant) capacitors?
Once I have replaced all of the paper and electrolytic capacitors (and the occational off tolerance resistor) RF alignment is next. The IF frequencies (10.7/460) and the transformers are identified. However, there are plenty of other adjustments with no explanation. Where might I find the alignment procedures?
Please forgive me if this information is readily available on the internet. If so, then please recomend an appropriate web site.
Thank you in advance for your time,
Paul.
Paul E. Pinyot † 2013, 25.Jan.05