• Année
  • 1957/1958
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 78537
    • alternative name: Grundig Portugal || Grundig USA / Lextronix

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 6
  • Principe général
  • Super hétérodyne (en général); FI/IF 460 kHz; Modèle pour exporter
  • Circuits accordés
  • 7 Circuits MA (AM)     10 Circuits MF (FM)
  • Gammes d'ondes
  • PO, OC et FM
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110 - 120 Volt
  • Haut-parleur
  • 3 HP
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Majestic 1088-USA - Grundig Radio-Vertrieb, RVF,
  • Forme
  • Modèle de table avec boutons poussoirs.
  • Dimensions (LHP)
  • 18.5 x 13 x 8.75 inch / 470 x 330 x 222 mm
  • Remarques
  • USA-Version des Musikgerätes 1088: UKW 88-108MHz, keine Langwelle, 1 dyn. Breitbandlautsprecher, 2 stat.Hochtöner, Frequenzskala. US version of the German Grundig Musikgerät 1088: FM 88-108Mc, no LW, 1 Pdyn woofer, 2 el.static tweeters, dial in frequencies (no station names).
  • Littérature
  • Motorola Service Manual

 Collections | Musées | Littérature


Le modèle Majestic fait partie des collections des membres suivants.


Contributions du forum pour ce modèle: Grundig Radio-: Majestic 1088-USA

Discussions: 1 | Publications: 3

I am working on a Grundig model 1088 radio. I had everything working except for the FM band. Originally the tuner was stiff and did not turn freely. I cleaned and oiled it and it turns much more freely now. Also the capacitor across the audio output tube had shorted and there was no sound.

I knew that the FM local oscillator was not working because although I could receive nothing except for a small place on the dial that I get 2 stations at once, I could get other stations when I swept my test oscillator up and down the dial.

I re-tested the ECC85 tube (RF amp. and local oscilllator). The mutual conductance checker tested it as questionable or marginal. The emission tester indicated that it is good on both sections. I raised the filament voltage 50% for a period of time in an atempt to rejuvenate it. When I put the tube back in place. the radio played nicely! It seems that a marginal tube will not work for the RF amp. and local oscilllator.

I do not hear anything from the electrostatic speakers that are mounted on the left and right sides. Apparently they will need to be replaced. Does anyone knw where to get a pair?

Steven Sostrom

Steven Sostrom, 13.Apr.05

Weitere Posts (3) zu diesem Thema.