• Año
  • 1946–1948
  • Categoría
  • Receptor para radioaficionados (puede incluir bandas de radiodifusión publ.)
  • Radiomuseum.org ID
  • 18702

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 15
  • Principio principal
  • Superheterodino con paso previo de RF; ZF/IF 455 kHz
  • Gama de ondas
  • OM, más de dos OC y FM
  • Tensión de funcionamiento
  • Red / Acumuladores (posiblemente también baterias) / 105-125 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 8 W (unknown quality)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: SX-42 - Hallicrafters, The; Chicago,
  • Forma
  • Boatanchor (militar, profesional >20 kg).
  • Ancho, altura, profundidad
  • 20 x 10.2 x 16 inch / 508 x 259 x 406 mm
  • Anotaciones
    • Coverage in MHz:
      • 0.540-1.62
      • 1.62-5, 5-15
      • 15-30
      • 27-55
      • 55-110
    • Xtal-IF-Filter
    • DC Operation also by a 6 Volts Storage Battery and "B" Batteries or Vibrapack

    Price $250-$275, IF's 455 &10.700 kHz for FM, Pull-push LF stage 8 Watts; 27-110 MHz FM. Source -> Konrad Birkner.

    During production, the circuit was revised several times by the manufacturer and changed accordingly. Therefore, individual copies can differ from each other. Several circuit diagram revisions have been published by the manufacturer. In many devices, the manufacturer's circuit changes were subsequently carried out more or less completely.

     

  • Peso neto
  • 23.6 kg / 51 lb 15.7 oz (51.982 lb)
  • Precio durante el primer año
  • 275.00 $
  • Ext. procedencia de los datos
  • E. Erb 3-907007-36-0
  • Referencia esquema
  • Die «Thali Schemasammlung» führt das Modell.

 Colecciones | Museos | Literatura

Colecciones

El modelo SX-42 es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Hallicrafters, The;: SX-42

Hilos: 1 | Mensajes: 1

I am restoring a 1947 Hallicrafters SX 42. I had been searching for the power transformer winding resistances with no results.  The receiver is functional and the transformer is working fine. I am posting what I measured for resistances from this known working unit. All tubes and lamps were removed for these measurements.

Primary (120v):  3 Ω

5 volt secondary:  0.1 Ω

6.3 volt secondary:  0.2 ohms

High voltage to Center Tap #1  54 Ω

High Voltage to Center Tap #2: 58 Ω

Wayne Rosberg, 18.Dec.12

Weitere Posts (1) zu diesem Thema.