• Year
  • 1940 ?
  • Category
  • Military Receiver
  • Radiomuseum.org ID
  • 330260

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 6
  • Valves / Tubes
  • Main principle
  • Superhet with RF-stage; ZF/IF 239 kHz
  • Tuned circuits
  • 6 AM circuit(s)
  • Wave bands
  • Wave Bands given in the notes.
  • Power type and voltage
  • Storage and/or dry batteries / 24-28 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: BC-946-B - MILITARY U.S. different makers
  • Shape
  • Chassis only or for «building in»
  • Dimensions (WHD)
  • 125 x 140 x 300 mm / 4.9 x 5.5 x 11.8 inch
  • Notes
  • The BC-946-B is the 520-1500 kHz version of the modular US Army Air Force SCR-274N series, each of which used an IF that was optimized for its RF coverage.

    It was the most compact design possible while still allowing servicing and consisting of six metal octal tubes including an RF amp and two IF amps in a superheterodyne set with tuning that was designed to be within ½ percent throughout its range.

    The Command sets were designed in the mid 1930s by the Aircraft Radio Corporation (ARC) shortly after metal octal tubes were introduced by RCA & GE. ARC had started as a spin-off of Radio Frequency Laboratories in Boonton NJ, and had initially developed radio range receivers for the Commerce Department starting in 1928. The sets were meticulously designed by the engineers headed by Dr. Frederick H. Drake, the Drake of Browning-Drake, who is credited with conceiving the idea of the modular system of superhet radios in 1934. The tuning controls for the radios are by way of a long mechanical cable to the cockpit, a system which was also used at the time for early automobile radio tuning and speedometers. ARC then received a preliminary and confidential contract from the Navy in 1937 for a “Type K” series of radios. An early version of the “K” used an as-yet-unmarked version of the 12A6 tube, important to the design as its 12 volt filament current requirement was the relatively minimal 150 mA and could thus be used directly in series with other standard 12 volt 150 mA receiving tubes. It is conceivable that RCA made the 12A6 at the request of ARC, as it is quite distinct from other octal audio output tubes then manufactured. Based on tests of the Type K series, the Navy adopted the sets in June 1939 for what became known as the ARA (receivers) and ATA (transmitters). The command sets produced for the Navy were so successful that the Army Air Force adopted them in 1940 as the SCR-274N series, with the “N” in that nomenclature reportedly a tip-of-the-hat to Navy.

  • Net weight (2.2 lb = 1 kg)
  • 4 kg / 8 lb 13 oz (8.811 lb)
  • Author
  • Model page created by Rich Post. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model BC-946-B is part of the collections of the following members.

 Forum