Rexophone 2 valve
Morch Bros. Ltd., London
- Country
- Great Britain (UK)
- Manufacturer / Brand
- Morch Bros. Ltd., London
- Year
- 1923 ?
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 106113
-
- Brand: Rexophone
- Number of Tubes
- 2
- Valves / Tubes
- Main principle
- TRF with regeneration; 1 AF stage(s)
- Tuned circuits
- 1 AM circuit(s)
- Wave bands
- Broadcast (MW) and Long Wave.
- Power type and voltage
- Storage and/or dry batteries
- Loudspeaker
- - For headphones or amp.
- Material
- Wooden case
- from Radiomuseum.org
- Model: Rexophone 2 valve - Morch Bros. Ltd., London
- Shape
- Tablemodel, Box - most often with Lid (NOT slant panel).
- Dimensions (WHD)
- 12.25 x 6.5 x 4 inch / 311 x 165 x 102 mm
- Notes
- The Rexophone with two valves has plug in coils at the left side. The measurement of the box is 12.25 long by 6.5 wide by 4 inches high. The overall dimensions of the Rexophone are 18 by 6.5 by 9 inches. The radio is a regenerative with one stage of audio amplification. It has a switch to cut the audio stage in and out of the circuit. It also has a switch to disable the grid-leak. There should be a third coil. It is missing in the example shown by Steve O'Bannon.
- External source of data
- Steve O'Bannon, Plano, Texas, USA
- Author
- Model page created by Ernst Erb. See "Data change" for further contributors.
- Other Models
-
Here you find 3 models, 3 with images and 0 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Morch Bros. Ltd., London