Klystron Power Supply LS 525R

Oltronix AB; Vällingby

  • Année
  • 1966 ??
  • Catégorie
  • Alimentation/stabilisateur de tension ou batterie ou chargeur
  • Radiomuseum.org ID
  • 339632

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation Courant Alternatif (CA)
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Klystron Power Supply LS 525R - Oltronix AB; Vällingby
  • Forme
  • Modèle de table vertical (pas forme catédrale)
  • Remarques
  • This instrument is a very stable DC power supply for operating reflex klystrons. Beam, reflector, grid and heater voltages are separately regulated. The reflector voltage may be unmodulated for c.w. operation of the klystron or modulated with an internal generated square wave, pulse sawtooth, sine wave or an external signal. The grid voltage may be internally modulated with square wave or pulse.
    The beam voltage is variable from -200 V to -3600 V at 0 to 125 mA. A 10 per cent line voltage variation causes less than 300 mV in the output and the change from no load to full load causes a variation of less than 200 mV.
    The output is continuously variable in four ranges: 200 to 1,200; 1,000 to 2,000; 1,800 to 2,800 and 2,600 to 3,600, and is protected against overloads and shorts by an electronic fuse adjustable from 10 to 125 mA.

     All characteristics are much more clearly described in the attached article.

  • Littérature
  • "Electronic Engineering" volume 38, number 466, December 1966.
  • Auteur
  • Modèle crée par Pier Antonio Aluffi. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum