• Année
  • 1976
  • Catégorie
  • Divers / autres - détails dans les remarques
  • Radiomuseum.org ID
  • 182219

 Spécifications techniques

  • No. de transistors
  • 1
  • Semi-conducteurs
  • Principe général
  • Convertisseur / adaptateur HF (pas convertisseur tension); FI/IF 200 kHz
  • Gammes d'ondes
  • Bandes en notes
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110; 115; 127; 220; 230; 240 Volt
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Panoramic Adapter PAN300 - Standard Radio & Telefon AB
  • Forme
  • Rack
  • Dimensions (LHP)
  • 483 x 80 x 400 mm / 19 x 3.1 x 15.7 inch
  • Remarques
  • PAN300 is a narrow band analyzer working with a 200 kHz input frequency and the sweep width selectable between +/-5 kHz, +/-2.5 kHz and +/-0.5 kHz. The visual indication is displayed on a Cathode Ray Tube (CRT), where the x-axis is graduated in Hertz and the y-axis in Decibel. Also the sweep velocity is selectable; 4 kHz/sec, 0.5 kHz/sek or manually. Within the sweep width +/- 5 kHz and +/-2.5 kHz you can select any "1 kHz part" and expand it to cover the whole CRT screen, making it much easier to examine and study the spectrum around a certain frequency setting. Besides above mentioned facilities the PAN300 can also be used as an oscilloscope with the input terminals of the x- and y-amplifiers available on the rear panel making studies of Lissajou figures possible. The PAN300 is suitable for our receivers in the series CR300 and others having an IF of 200 kHz (Including Receiver CR91).
  • Poids net
  • 7 kg / 15 lb 6.7 oz (15.419 lb)
  • Source
  • - - Manufacturers Literature
  • Auteur
  • Modèle crée par Bengt Falkenberg. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Panoramic Adapter fait partie des collections des membres suivants.

 Forum