radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

CapaciTester CT355

CapaciTester CT355; TeleTest Instrument (ID = 1593230) Equipment CapaciTester CT355; TeleTest Instrument (ID = 2014552) Equipment
Use red slider bar for more.
CapaciTester CT355; TeleTest Instrument (ID = 1593230) Equipment
TeleTest Instrument: CapaciTester CT355 [Equipment] ID = 1593230 529x692
Select picture or schematic to display from thumbnails on the right and click for download.
For model CapaciTester CT355, TeleTest Instrument Corp.; N.Y.
 
Country:  United States of America (USA)
Manufacturer / Brand:  TeleTest Instrument Corp.; N.Y.
Year: 1956 ?? Category: Service- or Lab Equipment
Valves / Tubes 2: 6AV6 6AF6-G
schematic requested
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110 Volt
Loudspeaker - - No sound reproduction output.
Power out
from Radiomuseum.org Model: CapaciTester CT355 - TeleTest Instrument Corp.; N.Y
Material Various materials
Shape Tablemodel, with any shape - general.
Notes


Tester is limited to caps rated at least 150 vdc.
Capacity is .00001 to 50uf.
It has a "5" Function Knob;
1. OFF
2. DYN LEAK & CONTINUITY
3. Capacity LO
4. Capacity M
5. Capacity HI
It has "2" Test Buttons forDYN LEAK & CONTINUITY: "TEST" & "REFERENCE"

 

Model page created by Bill Troyer. See "Data change" for further contributors.



All listed radios etc. from TeleTest Instrument Corp.; N.Y.
Here you find 2 models, 2 with images and 0 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.



 


Forum contributions about this model
TeleTest Instrument: CapaciTester CT355
Threads: 1 | Posts: 2
Hits: 1043     Replies: 1
CapaciTester CT355 Information Needed
Bill Troyer
06.Jan.14
  1

My capacitor tester is a CapaciTester CT355 mfg. by TeleTest Instrument Corp, NY.
Uses one 6AV6, and one 6AF6-G
I cannot find any info on this unit. There is no calibration on this unit.
Test modes seem to be; Dynamic Leakage, Capacity, and Continuity.
Tester is limited to caps rated at least 150 vdc.
Capacity is .00001 to 50uf.
It has a "5" Function Knob;
1. OFF
2. DYN LEAK & CONTINUITY
3. Capacity LO
4. Capacity M
5. Capacity HI
It has "2" Test Buttons forDYN LEAK & CONTINUITY: "TEST" & "REFERENCE"

I have figured out the leakage and the capacity tests, but not sure about the continuity and reference.
There does not seem to be any where to insert a reference cap unless you put it in the continuity position while placing th cap under test in the capacity position.
Any help with info would be greatly appreciated.

Ernst Erb
08.Jan.14
  2

Hi Bill
I see that this is without an answer since two days. The main reason: Such questions have to come from a model page. I see that we have no model page for this instrument yet.

So I advise you to create the model by using the link "Create New Model" just over "L I N K S".
You have the manufacturer (brand), the model name, know what it is, what current it needs, the material, shape and even the tubes and measures.
You can already upload some photos to your proposal.

After the model is accepted by the model admins, you can use "my model" and for instance request a schematic. This comes in a list and there will be a red entry on the model page until a member loads a schematic.

Good is also that your forum entry shows some activity like uploading some pictures.
It seems that you have used your 1000 points by "look up's" or "downloads" which is the same for a server.

I wish you good luck.

 
TeleTest Instrument: CapaciTester CT355
End of forum contributions about this model

  
rmXorg