Trio Solid State AM/FM Stereo Tuner KT-8005

Kenwood, Trio-Kenwood Inc.; Komagane

  • Year
  • 1973–1976
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 327405
    • alternative name: Trio Corp.
    • Brand: Jennen

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110-120; 220-240 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Various materials
  • from Radiomuseum.org
  • Model: Trio Solid State AM/FM Stereo Tuner KT-8005 - Kenwood, Trio-Kenwood Inc.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 435 x 153 x 300 mm / 17.1 x 6 x 11.8 inch
  • Notes
  • A hi-fi AM/FM stereo tuner with an analogue dial housed in a metal case with wooden side panels. With Signal strength/Multipath and Tuning meters, indicators for AM, FM, FM Stereo, MPX Filter and Muting, rotary Tuning and Output Level controls, rotary 2 stage Muting switch, on/off push button switches for MPX Filter and Multipath,  push button switches for AM, FM Auto, FM Stereo Only and FM Mono. On the back, an adjustable ferrite bar antenna, a 75 ohm F type coaxial FM antenna connector, terminals for AM and FM antennae, RCA phono sockets for Line Output, Output to a Tape recorder and for FM Multipath Output.

    Specification  
    FM TUNER SECTION  
    Usable Sensitivity (IHF)  1.5µV
    Quieting Slope 3µV: 55dB, 10µV: 65dB, 50µV: 75dB
    Frequency Response 50-15,000Hz ±0.5dB
    Harmonic Distortion Mono 0.2% (at 400Hz 100% mod.), Stereo 0.3%
    Signal to Noise Ratio 75dB
    Image Rejection 100dB
    Selectivity (IHF Alt channel) 100dB
    IF Rejection 100dB
    Spurious Signal Rejection 110dB
    AM Suppression 65dB
    Capture Ratio 1.0dB
    Stereo Separation 40dB at 100Hz-10,000Hz
    35dB at 50Hz-15,000Hz
    Sub Carrier Suppression  65dB
    Antenna Impedance 300Ω Balanced, 75Ω Unbalanced
    AM TUNER SECTION  
    Usable Sensitivity (IHF) 13µV
    Signal to Noise Ratio 50dB at 1mV input
    Harmonic Distortion 0.5%
    Image Rejection 70dB
    Selectivity (IHF) 40dB
    IF Rejection 70dB
    Antenna Built-in ferrite antenna, External antenna terminal
    Output Voltage  
     FM
     AM
    1.5V at 400Hz 100% mod.
    0.15V at 400Hz 30% mod.
    Output Impedance 100Ω
    Multipath Output Voltage 0.15V (V & H)
    Multipath Output Impedance 20KΩ

    Power requirements: 110-120V/220-240V AC 50/60Hz with voltage selector
    Power Consumption: 20 Watts

    Same as the Kenwood KT-8005 Solid State AM/FM Stereo Tuner.

  • Net weight (2.2 lb = 1 kg)
  • 11.3 kg / 24 lb 14.2 oz (24.89 lb)
  • Mentioned in
  • -- Original prospect or advert (1973-74 and 1975-76 Kenwood Hi-Fi catalogues)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Schematic with Specification Kenwood KT-8005)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum