C-MOS-Keyer ETM-1C Version 2

Samson, Margot; Osburg

  • Year
  • 1983
  • Category
  • Amateur Equipment (Other, but not Key)
  • Radiomuseum.org ID
  • 141314
    • Brand: ETM

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 5
  • Wave bands
  • - without
  • Power type and voltage
  • Dry Batteries / 4 × 1,5 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: C-MOS-Keyer ETM-1C [Version 2] - Samson, Margot; Osburg
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 65 x 36 x 108 mm / 2.6 x 1.4 x 4.3 inch
  • Notes
  • Samson C-MOS-Keyer ETM-1C.
    6 ICs.
    Abschaltbare Strich-Punkt-Speicher, automatische Zeichenergänzung, automatische Pausenergänzung, für Squeeze-Betrieb vorgesehen, Strich-Punkt-Verhältnis 3:1, eingebauter Mithörgenerator; Tastgeschwindigkeit 40···230 BpM; Betriebsspannung: 4···8 V, Ruhestromverbrauch: 1 µA, Stromverbrauch bei Betrieb: ca. 14 mA.
  • Net weight (2.2 lb = 1 kg)
  • 0.2 kg / 0 lb 7 oz (0.441 lb)
  • Source of data
  • -- Original-techn. papers.
  • Mentioned in
  • Gregor Ulsamer: "Faszination Morstetasten"
  • Author
  • Model page created by Bernd P. Kieck. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model C-MOS-Keyer is part of the collections of the following members.

 Forum

Forum contributions about this model: Samson, Margot;: C-MOS-Keyer ETM-1C

Threads: 1 | Posts: 1

Die ETM-1C hat es in verschiedenen Versionen gegeben:

V1 (nur als Bausatz?) hat 4 Transistoren und im Ausgang ein Relais, V2 hat 5 Transistoren, V3 hat 3 Transistoren. Die zugehörigen Schaltbilder sind im Netz verfügbar und mit diesen V-Nummern gekennzeichnet.

Ich besitze offensichtlich ein Exemplar der Version 2:

Bei dem hier im RMorg gezeigten Exemplar passen Schaltung (V2) und Bild (wohl V3) nicht zusammen.

Vielleicht weiß jemand mehr?

 

Joachim Glüder, 05.Sep.16

Weitere Posts (1) zu diesem Thema.