- Land
- Kanada
- Hersteller / Marke
- Northern Electric Co. Ltd.; Montreal, QC ; Belleville, ON
- Jahr
- 1922/1923
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 192955
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Röhren
- 1
- Röhren
- 215A
- Hauptprinzip
- Geradeaus ohne Rückkopplung
- Anzahl Kreise
- 1 Kreis(e) AM
- Wellenbereiche
- Mittelwelle, keine anderen.
- Betriebsart / Volt
- Trockenbatterien
- Lautsprecher
- - Für Kopfhörer oder NF-Verstärker
- Material
- Gerät mit Holzgehäuse
- von Radiomuseum.org
- Modell: Receiver R-1 - Northern Electric Co. Ltd.;
- Form
- Tischgerät, Truhenform, meist mit Deckel (NICHT Schrägpult).
- Bemerkung
-
The Model R-1 was the first commercial broadcast receiver produced by Northern Electric. The R-1 first appeared in the Nov. 1, 1922 Nortern Electric Radio Bulletin No. 1000. The R-1 was a Non-regenerative TRF circuit. The first R-1 receivers were not equpped to handle a variometer to provide regeneration. Later models had a pair of binding posts in the upper RH corner of the front panel that interrupted the plate circuit to provide a feedback path.
- Originalpreis
- 30.00 cdn
- Literaturnachweis
- The Early Development of Radio in Canada 1901-1930 (Page 51)
- Literatur/Schema (1)
- - - Manufacturers Literature (November 1, 1922 Northern Electric Company Radio Bulletin No. 1000)
- Autor
- Modellseite von Alan Larsen angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 291 Modelle, davon 246 mit Bildern und 254 mit Schaltbildern.
Alle gelisteten Radios usw. von Northern Electric Co. Ltd.; Montreal, QC ; Belleville, ON
Sammlungen
Das Modell Receiver befindet sich in den Sammlungen folgender Mitglieder.
Forumsbeiträge zum Modell: Northern Electric Co: Receiver R-1
Threads: 1 | Posts: 1
Even though Northern Electric had access to the Armstrong Regenerative License from at least 1923 on the company chose to market the companies first broadcast receiver as a Non-regenerative set. The R-1 pictured in the November 1st, 1922 Radio Bulletin No. 1000 didn't have an external method for adding a plate variometer to provide regeneration. Later models had two binding posts in the upper RH corner to allow the addition of the Northern Electric R-20 Variometer to provide regeneration.
Alan Larsen, 05.Dec.14