Stereo Amplifier SA-800
Pioneer Corporation; Tokyo
- Country
- Japan
- Manufacturer / Brand
- Pioneer Corporation; Tokyo
- Year
- 1971/1972
- Category
- Audio Amplifier or -mixer
- Radiomuseum.org ID
- 150853
- Number of Transistors
- 35
- Semiconductors
- Main principle
- Audio-Amplification
- Wave bands
- - without
- Details
- Hi-Fi equipment
- Power type and voltage
- Alternating Current supply (AC) / 120; 110/120/130/220/240 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 68 W (165 W max.)
- Material
- Wooden case
- from Radiomuseum.org
- Model: Stereo Amplifier SA-800 - Pioneer Corporation; Tokyo
- Shape
- Book-shelf unit.
- Dimensions (WHD)
- 430 x 145 x 337 mm / 16.9 x 5.7 x 13.3 inch
- Notes
-
A hi-fi stereo integrated amplifier housed in a wooden case with continuous power output of 2 x 34 watts into 8 ohms or 2 x 39 watts into 4 ohms. With wide power bandwidth. Power and preamplifier sections can be separated. Optional phono input transformer PP-402 required for MC cartridge. Terminals for 2 pairs of loudspeakers and centre channel terminal for connection to mono tape recorder.
Stereo-Vollverstärker mit 2 x 39 Watt Sinus an 4 Ohm. 35 Transistoren, 2 FET's, 20 Dioden.
Specification POWER AMPLIFIER SECTION Continuous Power Output
(both channel driven)39W + 39W into 4Ω
34W + 34W into 8ΩMusic Power Output (IHF) 165 Watts into 4Ω
108 Watts into 8ΩHarmonic Distortion < 0.5% (Continuous power output) Intermodulation Distortion < 0.5% (Continuous power output) Power Bandwidth (IHF) 5Hz — 50kHz
(8Ω, Harmonic Distortion <0.5%)Frequency Response 5Hz — 80kHz ±1dB Input Sensitivity/Impedance
(1kHz, Continuous power output)560mV/100kΩ Speakers 4 — 16Ω Damping Factor > 65 (8Ω, 1kHz) Center Channel Output 500mV PREAMPLIFIER SECTION Output Voltage 3V (Rated output), 5V (Max.) Harmonic Distortion < 0.1% Frequency Response 20Hz — 60kHz ±1dB Input Sensitivity/Impedance
(1kHz, for rated output)PHONO 1. MAG 3mV/50kΩ
CER 56mV/100kΩPHONO 2. MM 3mV/50kΩ
MC 110µV/30Ω (with PP-402)MIC
TUNER
AUX 1, 2
TAPE MONITOR 1, 22.3mV/50kΩ
230mV/200kΩ
230mV/200kΩ
230mV/200kΩRecording Output TAPE REC 1, 2 (Pin jack)
TAPE REC (DIN connector)230mV
35mVEqualization Curve PHONO: RIAA LOW Filter
HIGH Filter-3.5dB/60Hz (12dB/oct.)
-3dB/6kHz (12dB/oct.)Muting -20dB Channel Separation (1kHz) PHONO
TUNER, AUX> 50dB
> 55dBSemiconductors: 35 Transistors, 2 FETs, 20 Diodes
Versions/Power requirements
KUW USA / 120V AC 60Hz
KCW Canada / 120V AC 60Hz
FVW General Export / 110/120/130/220/240V AC 50/60Hz with voltage selectorPower consumption: 230 watts max.
- Net weight (2.2 lb = 1 kg)
- 10.3 kg / 22 lb 11 oz (22.687 lb)
- Source of data
- -- Original prospect or advert
- Mentioned in
- - - Manufacturers Literature (1972 Pioneer Stereo Components catalogues)
- Literature/Schematics (1)
- - - Manufacturers Literature (Service manual Pioneer SA-800 dated 1971)
- Literature/Schematics (2)
- - - Manufacturers Literature (Operating Instructions Pioneer SA-800)
- Author
- Model page created by Franz Scharner. See "Data change" for further contributors.
- Other Models
-
Here you find 1144 models, 1129 with images and 201 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Pioneer Corporation; Tokyo