• Anno
  • 1923–1925
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 214003

 Specifiche tecniche

  • Numero di tubi
  • 1
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione universale (doppia: CC/CA) / 110/220 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Bachelite, valvole visibili
  • Radiomuseum.org
  • Modello: Tube filament tester 453 - Philips; Eindhoven tubes
  • Dimensioni (LxAxP)
  • 150 x 150 x 0 mm / 5.9 x 5.9 x 0 inch
  • Annotazioni
  • To check filament continuity of early E3 and E4 base tubes. The 453 is a Miniwatt tester and the first Philips Miniwatt’s were the B2 and D6 tubes in 1923. There are tipped ones and tipless ones. They were also the first tubes with getter and you can not see the filament. That will be the reason for making the 453. In 1925, the tube filament tester 453 was already obsolete because it can not test the emission of a tube and the anode current became much bigger. The neon indicator bulb with spiral anode was made first with a metal base and tip and later with a moulded base, clear and tipless.

    Heizfaden-Durchgangsprüfer für Röhren mit E3 und E4 Sockel.
  • Peso netto
  • 0.340 kg / 0 lb 12 oz (0.749 lb)
  • Autore
  • Modello inviato da Fin Stewart. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Tube filament tester fa parte delle collezioni dei seguenti membri.

Musei

Il modello Tube filament tester può essere visto nei seguenti musei.

 Forum