• Anno
  • 1955/1956
  • Categoria
  • Radio (o sintonizzatore del dopoguerra WW2)
  • Radiomuseum.org ID
  • 4021

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 7
  • Numero di transistor
  • Principio generale
  • Supereterodina (in generale); ZF/IF 460/10700 kHz
  • N. di circuiti accordati
  • 7 Circuiti Mod. Amp. (AM)     11 Circuiti Mod. Freq. (FM)
  • Gamme d'onda
  • Onde medie (OM), lunghe (OL), corte (OC) e MF (FM).
  • Tensioni di funzionamento
  • Rete / Batterie (ogni tipo) / 110; 127; 150; 220 / DEAC D3,9 & 1,5 & 90 Volt
  • Altoparlante
  • AP magnetodinamico ellittico (magnete permanente e bobina mobile).
  • Materiali
  • Vari materiali
  • Radiomuseum.org
  • Modello: Bajazzo 55 - Telefunken Deutschland TFK,
  • Forma
  • Apparecchio portatile > 20 cm (senza la necessità di una rete)
  • Dimensioni (LxAxP)
  • 380 x 270 x 150 mm / 15 x 10.6 x 5.9 inch
  • Annotazioni
  • Telefunken Bajazzo 55 arbeitet bei UKW als Einfachsuper mit 9 ZF-Kreisen. Bei AM ist der Empfänger als Vorstufensuper geschaltet. Sparschaltung, per Taste SPAR kann eine Heizfadenhälfte der Endröhre DL94 abgeschaltet werden.

    DEAC-Zelle D3,9, aus dem Netz wiederaufladbar mit Taste LADEN.

    Normalausführung in dunkelgrün, auch als Luxusausführung in braun lieferbar (DM 349,-).

  • Peso netto
  • 7.5 kg / 16 lb 8.3 oz (16.52 lb)
  • Prezzo nel primo anno
  • 338.00 DM
  • Letteratura / Schemi (1)
  • -- Original-techn. papers.

 Collezioni | Musei | Letteratura

Letteratura

Il modello Bajazzo è documentato nella seguente letteratura.

 Forum

Discussioni nel forum su questo modello: Telefunken: Bajazzo 55

Argomenti: 3 | Articoli: 12

Hello !

My 1955 Bajazzo runs fine on battery but has hum on mains.

so far, I've tried to replace the selenium heaters rectifier for a silicium one, the smoothing capacitor but to no avail. Owning a couple of DL94 I tried them in order to find the one with less hum. All I've found is that my GEC NOS one is microphonic !

As a last resort, I tried inserting a 1000 µF /10V capacitor in parallel on the NiCad regulating battery. It changes NOTHING !

So I get my scope and saw that the ripple on the 1.4 V heater voltage is less than 8mV and very small (buried in the noise) on the  HT. So what's wrong ? What did I miss ? 

I'm now exhausting all my knowledge on this matter, so I would _really_ appreciate your help and advice to make this set as perfect as it should be !

Many thanks in advance.

Best regards.

Georges Giralt, 08.Aug.09

Weitere Posts (6) zu diesem Thema.

Hello !

I own one of this set. Of course the DEAC NiCd is dead. So I'll manage to make a replacement. So far soo good.

But I need to make an ersazt battery for the 90 V HT. As they are since long gone, I have no information about them.The only thing is the "type Emce Nr. 760 stamp on the cover of the set.  I'll be glad to get as many information you may have. (size, capacity, scan of one model cover to put on the ersazt, schematics, tips for construction ...)

Last but not least, the cas need a good cleaning and restauration. So I'm looking for a replacement of the decorative plastic stapped on the box at the cover opening, as it is broken. (it is somewhat yellow)

Thank a lot in advance for your help and advice !

Georges Giralt, 21.Jun.09

Weitere Posts (5) zu diesem Thema.

 Ich besitze ein Gerät, welches dem hier aufgeführten optisch völlig gleicht. Allerdings hat es die Bezeichnung "Jubilate" auf der Front unten rechts (s. Foto). Bei dem hier gezeigten fehlt dieses Schildchen.

Frage: Wurde evtl. bei meinem Gerät die Bezeichnung nachträglich geändert, oder handelt es sich tatsächlich um ein "Jubilate" von 1955?

Da ich gerne Bilder dazu hochladen möchte, hätte ich diese Frage gerne geklärt, bevor ich ein neues Modell anlege,

Allegati

Volker Potthast, 04.Nov.08

Weitere Posts (1) zu diesem Thema.