Double tetrode

ID: 475075
This article refers to the component: To the tube/semiconductor

? Double tetrode 
10.Jul.18 13:47
6

Tomasz Szczesniak (PL)
Articles: 92
Count of Thanks: 3

This tube looks to be a double tetrode. It has three grids, but the third grid is connected to anode, as red arrow show on photo.

Attachments:

To thank the Author because you find the post helpful or well done.

 2
Data from Electronic Universal Vade-Mecum 
10.Jul.18 14:23
6 from 1150

Dietmar Rudolph † 6.1.22 (D)
Articles: 2492
Count of Thanks: 2
Dietmar Rudolph † 6.1.22

Your foto indeed shows a tube with a double system of identical systems.

However, the 12M1M is found in the "Electronic Universal Vade-Mecum, Vol 1, Wydawnictwa Naukowo-Techniczne, Warszawa, 1964".

Here, the 12M1M is a Triode - Penthode.

Probably, the type printed on the bulb of your specimen is erranious?

Regards,

Dietmar

To thank the Author because you find the post helpful or well done.

 3
Data from Electronic Universal Vade-Mecum 
10.Jul.18 17:58
41 from 1150

Tomasz Szczesniak (PL)
Articles: 92
Count of Thanks: 2

Yes, I owe this book, and realised that it has some errors and mifinformations, maybe this is one of them. 12М1М is clearly a double pentode, I recently buy this tubes (photos uploaded) and it is easily visible. Photos uploaded by Ernst Erb also depicts double pentode with 3rd grid connected with anode.

To thank the Author because you find the post helpful or well done.

 4
12M1M double Pentode 
10.Jul.18 21:47
78 from 1150

Otmar Jung (D)
Editor
Articles: 287
Count of Thanks: 3

I have moved the pictures to the 12M1M double pentode.

Probably there are two different tubes with the same designation 12M1M or one of them is an error in the data books.

To thank the Author because you find the post helpful or well done.

 5
12M1M double Pentode 
11.Jul.18 08:58
115 from 1150

Jacob Roschy (D)
Moderator
Articles: 1766
Count of Thanks: 2
Jacob Roschy

These links always calls the 12м1м as double output pentode:

Приемно-усилительные лампы

Лампы и панельки

АудиоПортал
 

the information given in the Electronic Universal Vade-Mecum appears to be wrong.

I don't understand why the third grid is connected to anode. How can this tube operate as output pentode then ?

Best Regards,
Jacob

To thank the Author because you find the post helpful or well done.