250 kW Short-Wave Broadcast Transmitter SK 53 F3-2

BBC - Brown Boveri; Baden

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1981 ??
  • Kategorie
  • Kommerzieller Sender (nicht Sende-Empfänger)
  • Radiomuseum.org ID
  • 329089

 Technische Daten

  • Anzahl Röhren
  • 4
  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • Sender
  • Wellenbereiche
  • Kurzwellen (nur KW)
  • Betriebsart / Volt
  • Wechselstromspeisung / 3-24 k Volt
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: 250 kW Short-Wave Broadcast Transmitter SK 53 F3-2 - BBC - Brown Boveri; Baden
  • Form
  • Rack
  • Bemerkung

  • The 250 kW Short-Wave Broadcast Transmitter, Type SK 53 F3-2 with motorised manual tuning and equipped with a class “B” Modulator.

    Main features:

    • transistorized preliminary RF and AF stages
    • Class B modulation
    • Only four tubes (with Class B)
    • all rectifiers with solid state elements
    • automatic tuning
    • unlimited choice of frequency in automatic tuning mode in broadcast bands; on special request outside bands
    • frequency change time maximum 60 seconds for automatic version
    • sinusoidal and trapezoidal modulation
    • possibility of high-power SSB service using PSM
    • easy provision of DCC
    • protective and automatic sequence circuits ensure safety of the equipment
    • personnel security system fulfills IEC 215-1
    • very simple layout of RF circuits ensures easy accessibility to components through doors at front and rear
    • very high overall efficiency
    Abridged Specifications  
    Carrier power output 250 kW over full frequency range
    Frequency range 5.95-21.85 MHz
    Output impedance 50 Ω unbalanced/300 Ω balanced (with balun)
    Permissible standing-wave ratio (SWR) 1:2.0 at 50 ohm output/1:1.7 at 300 ohm output
    Carrier noise level below m = 100% f = 1000 Hz unweighted: -55 dB
    Carrier shift with sudden application or removal of 100% modulation the variation in the carrier voltage will not exceed 5%
    AF input level for m = 100% modulation across 600 Ω balanced input impedance: 0 dBm - 20 dBm. Recommended 18 dBm
    Required time for frequency change 3 min approx.
  • Literaturnachweis
  • - - Manufacturers Literature
  • Autor
  • Modellseite von Gary Cowans angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum