Sonic Holography Integrated Amplifier CM-1090

Carver Corporation; Lynnwood (WA)

  • Year
  • 1989
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 279057

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 60Hz, 120; 50Hz, 220 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 300 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Sonic Holography Integrated Amplifier CM-1090 - Carver Corporation; Lynnwood
  • Shape
  • Rack
  • Dimensions (WHD)
  • 19 x 4.5 x 14.5 inch / 483 x 114 x 368 mm
  • Notes
  • Carver Sonic Holography Integrated Amplifier Model CM-1090.
    Power output:
    100 watts per channel into 8Ω (stereo)
    150 watts per channel into 4Ω (stereo)
    Frequency response: 20Hz to 20kHz ± 1dB
    Total harmonic distortion: 0.1%
    Signal to noise ratio: 78dB (MM), 90dB (line)
    Phono Gain: 36dB
    Phono IN, Tuner IN, CD IN, Video1 IN, Video2/AUX IN, Tape1 IN OUT, Tape2 IN OUT
    PreAmp/Main  OUT IN
    Tone Control Turnover Frequencies: 100, 1000, 10000Hz
    Speaker Impedance A or B 8 Ohms min., A+B 16 Ohms min.
    AC Outlets:
    2x Switched 120VAC Total 200 Watts max.
    2x Unswitched 120VAC Total 300 Watts max.
    Sonic Hologram Generator Image Resolution: 5° horizontal, 20° vertical

    Patent Notice:
    United States Patent Number 4,218,585
     

  • Net weight (2.2 lb = 1 kg)
  • 21 lb (21 lb 0 oz) / 9.534 kg
  • Mentioned in
  • - - Manufacturers Literature (Service Manual)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Instruction / Owners Manual)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum