Viking RM392
Eaton Co. Ltd., The T. (Viking); Toronto
- Country
- Canada
- Manufacturer / Brand
- Eaton Co. Ltd., The T. (Viking); Toronto
- Year
- 1960 ?
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 307587
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 5
- Main principle
- Superheterodyne (common); ZF/IF 455 kHz; 2 AF stage(s)
- Tuned circuits
- 6 AM circuit(s)
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- AC/DC-set / 25-60 Hz, 105-125 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 4 inch = 10.2 cm
- Power out
- 0.75 W (1.5 W max.)
- Material
- Plastics (no bakelite or catalin)
- from Radiomuseum.org
- Model: Viking RM392 - Eaton Co. Ltd., The T. Viking;
- Shape
- Tablemodel without push buttons, Mantel/Midget/Compact up to 14
- Notes
-
The Viking RM392 is a 5-tube table radio for standard broadcast reception. Available in white, coral, and turquoise cabinet. Loop antenna on back cover. Made by Electrohome for the Eatons department stores. See also models RM392R, RM392RR and RM392RRR.
- Literature/Schematics (1)
- Radio College of Canada (RCC) (Supplement 51)
- Author
- Model page created by Tom Seeger. See "Data change" for further contributors.
- Other Models
-
Here you find 246 models, 129 with images and 223 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Eaton Co. Ltd., The T. (Viking); Toronto