High Frequency test Probe 85RF

Fluke, John, Mfg. Co. Inc.; Everett (WA)

  • Year
  • 1981
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 191050

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Wave bands
  • - without
  • Power type and voltage
  • No Power needed
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: High Frequency test Probe 85RF - Fluke, John, Mfg. Co. Inc.;
  • Dimensions (WHD)
  • 175 x 7 x 7 mm / 6.9 x 0.3 x 0.3 inch
  • Notes
  • Designed to convert a DC voltmeter into a high frequency (from 100KHz to 500MHz) AC voltmeter; DC output calibrated to be equivalent to the RMS value of a sine wave input (AC to DC ratio 1:1); voltage range from 0.25 volts to 30 volts RMS; maximum input voltage 30V rms, 200V DC; input capacitance approximately 3 pF; fits standard 0.75-inch dual banana connectors; compatible with any DC voltmeter that has an input resistance of 10 megOhms +/- 10%.
  • Net weight (2.2 lb = 1 kg)
  • 0.2 kg / 0 lb 7 oz (0.441 lb)
  • Source of data
  • -- Original-techn. papers.
  • Author
  • Model page created by Emilio Focosi. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model High Frequency test Probe is part of the collections of the following members.

 Forum