Go + Play II (2)
Use red slider bar for more.
Harman Kardon; New: Go + Play II [Ampl/Mixer] ID = 1610491 933x661
Select picture or schematic to display from thumbnails on the right and click for download.
|
|
||||
| Year: 2011 | Category: Audio Amplifier or -mixer | ||||
| Semiconductors (the count is only for transistors) | Semiconductors present. |
|---|
| Main principle | Audio-Amplification |
|---|---|
| Wave bands | - without |
| Details | Loudspeaker + integr.Amplifier |
| Power type and voltage | Line / Batteries (any type) / 100-240 / D: 8× 1,5 Volt |
| Loudspeaker | 4 Loudspeakers |
| Power out | 60 W (max.) |
| from Radiomuseum.org | Model: Go + Play II - Harman Kardon; New York |
| Material | Modern plastics (no Bakelite or Catalin) |
| Shape | Portable set > 8 inch (also usable without mains) |
| Dimensions (WHD) | 500 x 230 x 240 mm / 19.7 x 9.1 x 9.4 inch |
| Notes |
Key Specifications:
■ Drivers: two Ridge and two Atlas transducers
■ Power: tweeters: 2 x 15 watts @ 1% THD;
woofers: 2 x 30 watts @ 1% THD
■ Frequency response: 40Hz – 20kHz
■ Signal-to-noise ratio: >85dB
■ Input sensitivity/impedance: 250mV/>10k ohms
■ Battery type: 8 x type D alkaline batteries
■ Power supply input voltage: 100 – 240V AC
■ Power supply output voltage: 18VDC @ 3.3A |
| Net weight (2.2 lb = 1 kg) | 3.9 kg / 8 lb 9.4 oz (8.59 lb) |
| Mentioned in | -- Original-techn. papers. |
Model page created by Sandor Selyem-Tóth. See "Data change" for further contributors.
All listed radios etc. from Harman Kardon; New York
Here you find 247 models, 207 with images and 88 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
