AM/FM Stereo Receiver AR-1219

Heathkit (Brand), Heath Co.; Benton Harbor (MI)

  • Année
  • 1977
  • Catégorie
  • Boîte de construction (composants et manuel) ou instructions
  • Radiomuseum.org ID
  • 367700
    • alternative name: Heath Company

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • Super hétérodyne (en général)
  • Gammes d'ondes
  • PO et FM
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 120; 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 30 W (sans distorsion)
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: AM/FM Stereo Receiver AR-1219 - Heathkit Brand, Heath Co.;
  • Forme
  • Appareil d'étagère
  • Dimensions (LHP)
  • 17 x 3.875 x 13 inch / 432 x 98 x 330 mm
  • Remarques
  • The AR-1219 is a low cost receiver with expensive looks and features. The right choice for your first system. When it comes to giving you performance at an economical price the      AR-1219 is hard to beat! That's because we've taken years of audio engineering experience and designed them into a simple, low-cost receiver that really performs. Our careful engineering ensures that annoying colorations and imperfections, evident in many low cost systems, just aren't there. Impressive features the AR-1219 offers are: rear panel jacks for easy access to all inputs and outputs and clearly labeled speaker connections to avoid confusion. A swivel-mounted antenna provides excellent AM listening and there are
    connections for an external 75- or 300-ohm FM antenna. For extra convenience, there's a tape monitor and a headphone jack with speaker disconnect switch.
    Quality AM and FM tuner sections exhibit performance and specifications almost
    unheard of in receivers in this price class. An extra-wide slide rule dial assures easy tuning for both AM and FM. And a stereo pilot lamp alerts you to stereo FM reception.
    The AR-1219 is easy to build even for a first-time builder. Metal case with brushed aluminum front panel and stained walnut-veneer end panels. 

    AR-1219 SPECIFICATIONS: AMPLIFIER: Frequency Response: ±1 dB, 7 Hz to 100 kHz.
    IM Distortion: less than 0.5%, full power; less than 0.2% at 1 watt. Damping Factor:
    Greater than 30. Input Sensitivity: Phono: 2 millivolts; Tape: 190 millivolts; Tape Monitor: 190 millivolts. (NOTE: Input sensitivity is the rms input voltage needed to obtain 15
    watts of output power per channel into 811 loads.) Input Overload: Phono: Greater than
    75 millivolts; Tape: Greater than 2.5 volts; Tape Monitor: Greater than 23 volts. Hum and Noise: Phono, —60 dB; Tape, —65 dB. FM SECTION: — Sensitivity: 2 µV*. Selectivity:
    60 dB'. Image Rejection: 50 dB'. Stereo Separation: 40 dB typ., 35 dB minimum. Signal
    to Noise': 65 dB (65 dB). AM SECTION — Sensitivity: 100 µV per meter'. Selectivity: 40
    GB. Power Requirements: 120/240 VAC, 60/50 Hz. Rated IHF (Institute of High Fidelity) Standards. 

  • Prix de mise sur le marché
  • 189.95 USD
  • Littérature
  • -- Original prospect or advert (1977 Heathkit Christmas catalog page 34 "The new AR-1219", 1979 Heathkit winter catalog page 32)
  • Auteur
  • Modèle crée par Glen Orriss. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum