radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

Portable Oscilloscope V-509

Portable Oscilloscope V-509; Hitachi Ltd.; Tokyo (ID = 1065254) Equipment Portable Oscilloscope V-509; Hitachi Ltd.; Tokyo (ID = 1065255) Equipment
Use red slider bar for more.
Portable Oscilloscope V-509; Hitachi Ltd.; Tokyo (ID = 1065254) Equipment
Hitachi Ltd.; Tokyo: Portable Oscilloscope V-509 [Equipment] ID = 1065254 933x700
Select picture or schematic to display from thumbnails on the right and click for download.
For model Portable Oscilloscope V-509, Hitachi Ltd.; Tokyo
 
Country:  Japan
Manufacturer / Brand:  Hitachi Ltd.; Tokyo
alternative name
 
Hitachi Sales Corp. of America
Year: 1987 ?? Category: Service- or Lab Equipment
Valves / Tubes 1:
Semiconductors (the count is only for transistors) Semiconductors present.
Wave bands - without
Details
Power type and voltage Line / Batteries (any type) / 220 / ? Volt
Loudspeaker - - No sound reproduction output.
Power out
from Radiomuseum.org Model: Portable Oscilloscope V-509 - Hitachi Ltd.; Tokyo
Material Metal case
Shape Portable set > 8 inch (also usable without mains)
Dimensions (WHD) 220 x 110 x 340 mm / 8.7 x 4.3 x 13.4 inch
Notes Bandwidth: DC to 50 MHz
2 channels with 1 mV sensitivity
Delayed sweep
AC or DC input
Type: rectangular mesh tube Hitachi 95 LB 31 with 12 kV acceleration potential and metal with the support of phosphorus.
Display Type: P31 phosphorus (GH) standard
Useful screen size: 8 x 10 div (1 div = 6.35 mm) internal graticule
Z Input: DC-coupled continuous positive signal intensity decreases.
5V signal p-p - DC to 1 MHz
Vertical deformation (2 identical channels)
Bandwidth and rise time: DC to at least 50 MHz and 7.0 ns rise time or less.
Deviation Factor: 5 mV / div to 5 V / div in 10 calibrated steps, 1-2-5 sequence.
Uncalibrated continuous control between steps
x 5 Extender extends the type of deviation min. 1 mV / div.
Display Modes: CH1, CH2 (normal or reverse), alternate, chopped (rate of 250 kHz), added.
Input Impedance: 1 M ohm in parallel with 30 pF
Maximum input voltage: 250 V (DC + peak AC)
Delay Line: Allows viewing of displayed waveform edge.
CH1 Output: DC 10 MHz
Horizontal deflection:
Base Sequence Time: 0.1 µs/div to 0.2 s/div in 20 calibrated steps, 1-2-5.
Uncalibrated continuous control between steps.
x 10 Magnifier enlarges faster sweep speed to 10 ns/div.
Base Sequence B time: 0.1 µs/div of 2 ms/div in 14 calibrated steps, 1-2-5
x 10 Magnifier enlarges faster sweep speed to 10 ns/div.
Horizontal display modes: Single, intensified, B delayed
Calibrated sweep delay: Continuous calibration control
Activation and b
Shooting modes: Auto, Normal, single sweep, TV-V, TV-H
A trigger Hold Off: Adjustable control permits a stable display of complex repetitive waveform.
Trigger source: Internal (CH1, CH2), line, external, external x 10
B trigger and source modes: Auto, Normal
X-Y operation (CH1 Horizontal, Vertical CH2)
Deviation Factor: Same as vertical deflection
Bandwidth: DC to at least 500 kHz
Phase error: 3 degrees or less from DC to 100 kHz
Gauge: 0.5 V + / -1% square wave frequency of 1 kHz
Battery: 2 hours continuous
Net weight (2.2 lb = 1 kg) 5 kg / 11 lb 0.2 oz (11.013 lb)

Model page created by Jose Mayoral-Diaz. See "Data change" for further contributors.



All listed radios etc. from Hitachi Ltd.; Tokyo
Here you find 933 models, 814 with images and 210 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.




  
rmXorg