Stereo Amplifier SA-40A

Monarch Electronics Int. Inc.; North Hollywood, CA

Data
Forum
Pictures
Collections

  • Year
  • 1965 ??
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 278353

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 7
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 50/60 Hz; 105 - 125 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 32 W (unknown quality)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Amplifier SA-40A - Monarch Electronics Int. Inc.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 12.25 x 4.375 x 10.625 inch / 311 x 111 x 270 mm
  • Notes

  • Monarch Stereo Integrated Amplifier Model SA-40A.
    16 Watts per Channel (program material)
    Frequency Response +/-1dB 30 - 25000Hz
    THD less than 1%
    Sensitivity:
    Tape 3,5mV, Phono Mag 4,5mV, Phono Cer 0,16V
    Tuner, AUX 0,3V each
    Inputs: Tape, Phono, Tuner, AUX
    Tone Controls:
    Bass +/-10dB 50Hz
    Treble +/-10dB 10000Hz
    Rumble Filter
    Loudness
    Speakers 4, 8 and 16 Ohms
    HUM Adjustors on Rear Panel
    AC Outlets:
    2x for 300 Watts total load
    Power Consumption 110 Watts (117VAC)

    This model is most likely technically identical to model Monarch SA-40.

    The user manual and schematics for model SA-40A have the "A" added by stamp. The technical differences between SA-40A and SA-40 are currently not known.

    This model was sold in Europe by the Dutch company Kontakt as model Kontakt SA-40A, modified for 220 V mains.

  • Net weight (2.2 lb = 1 kg)
  • 16 lb (16 lb 0 oz) / 7.264 kg
  • Mentioned in
  • - - Manufacturers Literature (Instruction Manual)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum