• Year
  • 1959/1960
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 29681

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 5
  • Main principle
  • Superheterodyne (common); ZF/IF 452 kHz; 2 AF stage(s)
  • Tuned circuits
  • 6 AM circuit(s)
  • Wave bands
  • Broadcast plus 2 Short Wave bands.
  • Power type and voltage
  • AC/DC-set / 110-127; 220 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 12 cm = 4.7 inch
  • Material
  • Bakelite case
  • from Radiomuseum.org
  • Model: B3X95U /00K - Philips; Eindhoven tubes
  • Shape
  • Tablemodel with Push Buttons.
  • Dimensions (WHD)
  • 328 x 183 x 155 mm / 12.9 x 7.2 x 6.1 inch
  • Notes
  • Variant /00K = cream color. Dial lamp: 8009D (6,3 V / 0,25 A).

  • Net weight (2.2 lb = 1 kg)
  • 2.9 kg / 6 lb 6.2 oz (6.388 lb)
  • External source of data
  • Erb

 Collections | Museums | Literature

Collections

The model is part of the collections of the following members.

 Forum

Forum contributions about this model: Philips; Eindhoven: B3X95U /00K

Threads: 1 | Posts: 37

Dial lamp is not working on my recently recapped and working Philips B3X95U radio.  The light was out prior to the recap, so I was expecting that I would need to replace it. 

I found in the service manual that the lamp used is 8009 D-07.  A cross reference I found online indicated this is a 6.3V .25A. 

I have tried an E10 6V .2A LED and incandescent bulb both did not work.  Measured the voltage at the lamp socket and it is reading 6V with no bulb and about 4V with the bulb in place. 

I by passed the socket with jumpers to a known good socket / bulb and still does not work.  I must be missing something? 

If anyone can point me in a direction on what to check, I would appreciate any help you can provide. 

Thanks

James Holava, 28.Dec.21

Weitere Posts (37) zu diesem Thema.