- Country
- Australia
- Manufacturer / Brand
- Philips Australia
- Year
- 1952/1952
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 138768
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 6
- Main principle
- Superheterodyne (common); ZF/IF 455 kHz; 2 AF stage(s)
- Tuned circuits
- 7 AM circuit(s)
- Wave bands
- Broadcast and Short Wave (SW).
- Power type and voltage
- Alternating Current supply (AC) / 220-240; 250-260 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
- Material
- Bakelite case
- from Radiomuseum.org
- Model: 140 - Philips Australia
- Shape
- Tablemodel, with any shape - general.
- Notes
- This model covers 530 to 1620 kHz and 5.9 to 18.4 MHz. In addition there is bandspread for the 31, 25, 19 and 16 metre bands. Circuit is the same (with a few minor component differences) to model 125 of 1951
- External source of data
- AORSM CD
- Source of data
- -- Schematic
- Circuit diagram reference
- Australian Official Radio Service Manual Vol. X
- Author
- Model page created by Peter Hughes. See "Data change" for further contributors.
- Other Models
-
Here you find 900 models, 689 with images and 411 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Philips Australia