Integrated Stereo Amplifier A-229

Pioneer Corporation; Tokyo

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1991
  • Kategorie
  • NF-(Niederfrequenz-) Verstärker oder -Mixer
  • Radiomuseum.org ID
  • 335817

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Hi-Fi-Gerät
  • Betriebsart / Volt
  • Wechselstromspeisung / 220-230/240; 110/120-127/220/240 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 70 W (sinus/unverzerrt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Integrated Stereo Amplifier A-229 - Pioneer Corporation; Tokyo
  • Form
  • Regalgerät wie HiFi-Komponente für Bücherwand.
  • Abmessungen (BHT)
  • 403 x 103 x 282 mm / 15.9 x 4.1 x 11.1 inch
  • Bemerkung

  • A hi-fi stereo integrated amplifier housed in a black case with continuous power output of 2 x 35 watts into 8 ohms (2 x 40 watts into 8 ohms DIN). With rotary controls for Volume, Balance, Bass and Treble, rotary Input Selector (DAT/Tape1, CD, Phono, Tuner), push button switches for Speakers (A,B), Direct, Loudness and Adapt/Tape2 and a jack for headphones. RCA phono sockets for input Phono, Tuner, CD, for input/output DAT/Tape1 and Adpt/Tape2 and terminals for 2 pairs of loudspeakers (A, B). The General Export model (SD) also has 3 AC outlets.

    Same as the earlier Pioneer A-225 Stereo Amplifier apart from appearance.

    Specification  
    Continuous power output
    (both channels driven
    at 20Hz—20kHz)    		  
     THD 0.07%, into 8Ω 35W + 35W
    DIN Continuous power output
    (both channels driven at 1kHz)    		  
     THD 1.0%, into 8Ω
     THD 1.0%, into 4Ω    		 40W + 40W
    50W + 50W
    Total harmonic distortion
     20Hz—20kHz, 35W, 8Ω    		  
    0.07%
    Input sensitivity/impedance  
     PHONO (MM)
     CD, TUNER, DAT/TAPE 1, ADPT/TAPE 2    		 2.5mV/50kΩ
    150mV/50kΩ
    Output level/impedance
     TAPE REC, ADAPTOR OUTPUT
    150mV/2.2kΩ
    Frequency response
     PHONO (MM),
     CD, TUNER, DAT/TAPE 1, ADPT/TAPE 2,
    20Hz—20kHz ± 0.5dB
    10Hz—50kHz +1dB,-3dB
    Signal-to-Noise ratio
    (IHF short circuit, A network)    		  
     PHONO (MM, 5mV input)
    CD, TUNER, DAT/TAPE 1, ADPT/TAPE 2    		  77dB
    100dB
    Signal-to-Noise ratio
    (DIN, continuous power/50mW)    		  
     PHONO (MM)
     CD, TUNER, DAT/TAPE 1, ADPT/TAPE 2    		 67dB/61dB
    83dB/63dB

    Versions/Power requirements

    HEWZ Germany 220-230V, 240V AC 50/60Hz (switchable)
    HE Europe 220-230V, 240V AC 50/60Hz (switchable)
    HB UK 220-230V, 240V AC 50/60Hz (switchable)
    SD General 110V,120V-127V,220V,240V AC 50/60Hz with voltage selector

    Power Consumption:  210 watts

  • Nettogewicht
  • 5.6 kg / 12 lb 5.4 oz (12.335 lb)
  • Literatur/Schema (1)
  • - - Manufacturers Literature (Service manual Pioneer A-119 A-229 dated Mar 1991 refers to A-225)
  • Autor
  • Modellseite von Howard Craven angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum