Stereo Amplifier SA-600

Pioneer Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1971/1972
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 150852

 Technical Specifications

  • Number of Transistors
  • 21
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 110/120/130/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 38 W (100 W max.)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Stereo Amplifier SA-600 - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 145 x 337 mm / 16.9 x 5.7 x 13.3 inch
  • Notes

  • A hi-fi stereo integrated amplifier housed in a wooden case with continuous power output of 2 x 19 watts into 8 ohms or 2 x 20 watts into 4 ohms. With a switch to separate the power amplifier and preamplifier sections, terminals for 2 pairs of loudspeakers.

    Stereo-Vollverstärker mit 2 x 20 Watt Sinus an 4 Ohm. 21 Tranistoren, 8 Dioden.

    Specification  
    Power Amplifier Section  
    Continuous Power Output
    (both channel driven)    		 20W + 20W into 4Ω
    19W + 19W into 8Ω
    Music Power Output (IHF) 100W into 4Ω
    70W into 8Ω
    Harmonic Distortion < 0.5% (Continuous power output)
    IM Distortion < 0.5% (Continuous power output)
    Power Bandwidth (IHF) 10Hz - 50kHz (8Ω)
    Frequency Response 15Hz - 70kHz ±1dB
    Input Sensitivity/Impedance 420mV/70kΩ (1kHz)
    Speakers 4 - 16Ω
    Damping Factor 30 (8Ω, 1kHz)
    Preamplifier Section  
    Output Voltage 1V (Rated output), 3V (Max.)
    Harmonic Distortion < 0.1%
    Frequency Response 20Hz - 30kHz, ±1dB
    Input Sensitivity/Impedance
    (1kHz, for rated output)    		  
    PHONO 1, 2
    MIC
    TUNER
    AUX 1, 2
    TAPE MONITOR 1, 2    		 2.3mV / 50kΩ
    3.3mV / 20kΩ
    200mV / 95kΩ
    200mV / 95kΩ
    200mV / 95kΩ
    Recording Output  
     TAPE REC 1, 2 (Pin jack)
     TAPE REC (DIN connector)    		 200mV
    30mV
    Equalization Curve PHONO: RIAA
    Channel Separation (1kHz) PHONO > 50dB
    TUNER, AUX > 55dB

    Semiconductors:  21 Transistors, 8 Diodes


    Versions/Power requirements
    KUW USA  /  120V AC 60Hz
    KCW Canada  /  120V AC 60Hz
    FVW General Export  /  110/120/130/220/240V AC 50/60Hz with voltage selector

    Power consumption:  145 watts max

  • Net weight (2.2 lb = 1 kg)
  • 8.9 kg / 19 lb 9.7 oz (19.604 lb)
  • Source of data
  • -- Original prospect or advert
  • Mentioned in
  • - - Manufacturers Literature (1972 Pioneer Stereo Components catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Operating Instructions Pioneer SA-600)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Service manual Pioneer SA-600 dated Sep 1971)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum