Stereo Amplifier A-445

Pioneer Corporation; Tokyo

  • Year
  • 1989
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 321864

 Technical Specifications

  • Number of Transistors
  • -1
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 110; 120-127; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 120 W (160 W max.)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Amplifier A-445 - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 420 x 126 x 348 mm / 16.5 x 5 x 13.7 inch
  • Notes
  • A stereo hi-fi integrated amplifier with output power of 60 watts RMS (70 watts DIN) per channel into 8 ohms or 80 watts RMS (100 watts DIN) per channel into 4 ohms, housed in a black or silver metal case (the latter available in West Germany only and is referred to as the A-445-S model in the Service Manual only). Push button switches for Speakers A and B, Subsonic, Loudness, Direct, Muting and Phono Selector (MM/MC), rotary Bass and Treble tone controls, rotary switches for Rec Selector (Tape 2→1, Tape 1→2, Source, Off, CD, Tuner) and Input Selector (Tape2, DAT/Tape1, CD, Phono, Tuner and Line) and a jack for Phones. On the back, RCA phono input sockets for Phono, Line, Tuner and CD, input/output sockets for DAT/Tape1 and Tape2, input/output sockets for connection to an equalizer (after removal of two shorting bars) and terminals for two pairs of Loudspeakers, 

    Specification 
    Continuous power output
    (both channels driven at 20Hz-20kHz)
    60W + 60W (T.H.D. 0.008%, 8Ω)
    80W + 80W (T.H.D. 0.02%, 4Ω)
    DIN Continuous power output
    (both channels driven at 1kHz)
    70W + 70W (T.H.D. 1.0%, 8Ω)
    100W + 100W (T.H.D. 1.0%, 4Ω)
    Dynamic power output
    (on EIA dynamic test signal)
    75W/110W/150W (8Ω/4Ω/2Ω)
    Total harmonic distortion 
      20Hz-20kHz, 60W, 8Ω
      20Hz-20kHz, 80W, 4Ω
    0.008%
    0.02%
    Input sensitivity/impedance 
      PHONO (MM)
      PHONO (MC)
      CD, TUNER, LINE, TAPE
    2.5mV/50kΩ
    0.2mV/100Ω
    150mV/40kΩ
    Output level/impedance 
      TAPE REC, ADAPTOR OUT150mV/2.2kΩ
    Frequency response 
      PHONO (MM)
      PHONO (MC)
      CD, TUNER, LINE, TAPE
    20Hz-20kHz ±0.3dB
    20Hz-20kHz ±0.5dB
    5Hz-100kHz +0dB,-3dB
    Filter (SUBSONIC)17Hz (12dB/oct.)
    Signal-to-Noise ratio
    (IHF short circuit, A network)
     
      PHONO (MM, 5mV input/MC, 0.5mV input)
      CD, TUNER, LINE, TAPE
    93dB/74dB
    107dB

    Versions/Power requirements

    KCUU.S.A. & Canada model 120V only
    KCCanada model120V only
    HEZWest Germany model220V and 240V (Internally switchable)
    HEEuropean Continent model 220V and 240V (Internally switchable)
    HBUnited Kingdom model220V and 240V (Internally switchable)
    SDGeneral export model110V, 120-127V, 220V and 240V (voltage selector)

    Power consumption :  550 watts

    Similar to the Pioneer A-443 Stereo Amplifier.

  • Net weight (2.2 lb = 1 kg)
  • 8.1 kg / 17 lb 13.5 oz (17.841 lb)
  • Mentioned in
  • -- Original prospect or advert (1989 Pioneer Hi-Fi Components catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual A-445 A-445-S A-335 A-335-S dated Apr 1989)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Operating Instructions A-445 A-335 dated 1989)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum