Realistic Turntable With Synchronous Motor LAB-24A
Radio Shack (Tandy, Realistic, Micronta); USA
- País
- Estados Unidos
- Fabricante / Marca
- Radio Shack (Tandy, Realistic, Micronta); USA
- Año
- 1971
- Categoría
- Registrador o reproductor de sonido o visual
- Radiomuseum.org ID
- 367191
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Principio principal
- Amplificador de Audio
- Gama de ondas
- - no hay
- Especialidades
- Tocadiscos con cambiador autom.; Hi-Fi equipment
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 117 Volt
- Altavoz
- - Este modelo usa amplificador externo de B.F.
- Material
- Madera
- de Radiomuseum.org
- Modelo: Realistic Turntable With Synchronous Motor LAB-24A - Radio Shack Tandy, Realistic,
- Forma
- Unidad para estanteria.
- Ancho, altura, profundidad
- 15.25 x 6.675 x 13.45 inch / 387 x 170 x 342 mm
- Anotaciones
-
The Realistic LAB-24A is a vintage, fully automatic record changer turntable, popular in the 1970s and known for its solid build quality, including a BSR record changer mechanism and metal tonearm components. It was custom-made in England for Radio Shack and is considered a sought-after collectible piece.
Key Features and Specifications;
Type: Fully automatic record changer with manual cueing.
Motor: Features an AC synchronous motor for precision speed control.
Speeds: Supports four speeds: 16, 33, 45, and 78 RPM, which is a less common and notable feature for this type of changer.
Tonearm: Equipped with a better-than-average metal tonearm for a BSR changer, featuring adjustable tracking force and anti-skate calibrated for both conical and elliptical styli, and a damped cueing control.
Cartridge: Uses a standard 1/2 inch cartridge mount and originally came with a Shure or Audio-Technica cartridge/stylus, such as the Shure M75 or R47EB.
Platter: Features a full-size deep-drawn turntable platter with a rubber mat.
Connectivity: Uses standard small RCA jacks for stereo audio and a ground cord.
Dimensions: Measures approximately 15 1/4 x 13 1/4 x 6 1/2 inches.
Build: Features a sturdy wooden base instead of plastic on later models, with a non-hinged dust cover. It is essentially a rebranded BSR McDonald 510.Reviews and User Opinions;
Build Quality: Reviewers praise the solid construction, especially the metal components and wooden base, which were an upgrade over many standard BSR changers.
Performance: Users report that the turntable performs well when properly serviced, often exceeding the general BSR reputation. The ability to adjust tracking force and anti-skate is a significant positive.
Sound Quality: With the appropriate cartridge and a fresh stylus (e.g., Shure, Audio-Technica, Nagaoka MP-110), users mention the sound can be fantastic.
Maintenance: As a vintage unit, it often requires servicing (e.g., lubrication, new stylus) to function optimally. Replacement styli and cartridges are generally available from specialist online retailers.
- Precio durante el primer año
- 64.50 USD
- Mencionado en
- Radio Shack Catalog (1971 catalog version 1 page 32 "NEW FOR '71")
- Autor
- Modelo creado por Glen Orriss. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 2826 modelos, 2757 con imágenes y 167 con esquemas.
Ir al listado general de Radio Shack (Tandy, Realistic, Micronta); USA