• Year
  • 1974–1979
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 89980

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 14
  • Main principle
  • Superheterodyne (common); ZF/IF 470/10700 kHz
  • Wave bands
  • Broadcast, Long Wave and FM or UHF.
  • Power type and voltage
  • Batteries / addl. power jack / PP9: 1 x 9 Volt / 9 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) - elliptical
  • Power out
  • 1 W (unknown quality)
  • Material
  • Leather / canvas / plastic - over other material
  • from Radiomuseum.org
  • Model: R505 - Roberts Radio Co.Ltd., East
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 10.75 x 5.75 x 3.25 inch / 273 x 146 x 83 mm
  • Notes
  • A 3 band AM/FM portable transistor radio housed in a wooden case with leathercloth trim on the back and front and with teak end panels. With an elliptical 5 x 3 inch loudspeaker, 3.5mm jack for earphone, 5 pin DIN socket for tape recorder and 6mm socket for a 9 volt DC mains PSU. The 2 unknown transistors are in a Mullard VHF tuner module LP1402/2.

    Waveband Coverage
    MW 185-566 metres (1620-530kHz)
    LW 1152-2000 metres (265-150kHz)
    VHF 87-5-104.5 MHz

  • Net weight (2.2 lb = 1 kg)
  • 2 kg / 4 lb 6.5 oz (4.405 lb)
  • Literature/Schematics (1)
  • -- Original-techn. papers. (Roberts technical data R505 FM/AM Transistor Portable)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model is part of the collections of the following members.

 Forum