• Année
  • 1973
  • Catégorie
  • Amplificateur BF ou mélangeur BF
  • Radiomuseum.org ID
  • 288172

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • Amplification audio
  • Gammes d'ondes
  • - sans
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 117; 200; 220; 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 13 W (16 W max.)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Stereo Amplifier RA-210 - Roland Electronics Co. Ltd.,
  • Forme
  • Appareil d'étagère
  • Remarques
  • A hi-fi stereo integrated amplifier housed in a wooden case with rated output power of 6.5 watts per channel into 8 ohms, both channels driven. Bass and Treble tone controls, RCA phono sockets for Phono, Tuner, Aux and Tape input and for Tape output, AC outlet, terminals for one pair of loudspeakers and jack for headphones. 

    Specification  
    Continuous Power (RMS): 8 watts per channel into 4Ω,
    6.5 watts both channels driven into 8Ω.
    Harmonic Distortion: less than 0.5% at rated output
    IM Distortion: less than 1.1% at rated output
    Frequency Response:  25-75,000 Hz at rated output
    Power Bandwidth (IHF): 30-25,000 Hz.
    Input Sensitivity: Phono 2.7mV, Tuner 180mV, Tape 180mV, Aux 180mV.
    Input Impedance: Phono 45kΩ, Tuner 200kΩ, Tape 200kΩ, Aux 200kΩ.
    Signal to Noise Ratio: Phono 60db, Tuner 70db, Tape 70db, Aux 70db.
    Hum and Noise: Phono 60db, Tuner 65db, Tape 65db, Aux 65db.
    Damping Factor: 15 at 8Ω.
    Speaker Impedance:  4, 8, 16 Ω

    Power Requirements:     117V or 200V or 220V or 230V or 240V AC 50/60Hz.
    Power Consumption:      40 watts.

  • Poids net
  • 7.5 lb (7 lb 8 oz) / 3.405 kg
  • Prix de mise sur le marché
  • 80.00 $
  • Schémathèque (1)
  • - - Manufacturers Literature (Operating Manual RA-210 Solid State Stereo Amplifier)
  • Auteur
  • Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum