Integrated Amplifier AU-417

Sansui Electric Co., Ltd.; Tokyo

  • Year
  • 1979–1981
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 183204

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 55
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 120; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 130 W (unknown quality)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Integrated Amplifier AU-417 - Sansui Electric Co., Ltd.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 168 x 395 mm / 16.9 x 6.6 x 15.6 inch
  • Notes
  • Sansui Integrated Stereo Amplifier Model AU-417.
    Power output: 65 watts per channel into 8Ω (stereo)
    Frequency response: 5Hz to 100kHz
    Total harmonic distortion: 0.02%
    Bass +/-10dB 50Hz
    Treble +/-10dB 15000Hz
    Subsonic Filter -3dB 16000Hz, 6dB/Oct.
    Loudness 9dB at 50Hz, 7dB at 10000Hz
    Damping factor: 60
    Input sensitivity: 2.5mV (MM), 150mV (line)
    Signal to noise ratio: 80dB (MM), 100dB (line)
    Channel separation: 60dB (MM), 65dB (line)
    Output: 150mV (line)
    Speaker load impedance: 8Ω (minimum)
    Power Consumption max. 300 Watts
      

    Diodos: 29 Diodos zener: 8 Led: 1 Fets: 2 Representante, Distribuidor y Servicio Oficial en Uruguay: Promex Ltda.

  • Net weight (2.2 lb = 1 kg)
  • 12.2 kg / 26 lb 14 oz (26.872 lb)
  • Circuit diagram reference
  • Australian Official Radio Service Manual Vol. III
  • Mentioned in
  • - - Manufacturers Literature (Service Manual)

 Collections | Museums | Literature

Collections

The model Integrated Amplifier is part of the collections of the following members.

 Forum