Transcontinental 3 Band 10 Transistor 10S-P10

Sanyo Electric Co. Ltd.; Moriguchi (Osaka)

  • Year
  • 1961 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 157588

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 10
  • Main principle
  • Superheterodyne (common); ZF/IF 455 kHz
  • Tuned circuits
  • 5 AM circuit(s)
  • Wave bands
  • Broadcast plus 2 Short Wave bands.
  • Power type and voltage
  • Dry Batteries / C: 4 x 1.5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: Transcontinental 3 Band 10 Transistor 10S-P10 - Sanyo Electric Co. Ltd.;
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 230 x 115 x 50 mm / 9.1 x 4.5 x 2 inch
  • Notes
  • Sanyo Portable Transcontinental 3 Band 10 Transistor Radio Model 10S-P10.

    10 Transistor, 2 diodes, 3½" speaker, triple-wave, telescopic aerial, with leather case & earphone. Requires 4 x C batteries.

    Frequency Range:
    AM: 535 - 1605 kHz
    SW1: 2 - 6 MHz
    SW2: 6 - 18 MHz

    Marketed in Australia by Sanyo Sales & Service Co. during 1961 & sold for £54/12/-, batteries included.

    See also Sanyo Transcontinental 3 Band 10 Transistor 10S-P10N.

  • Net weight (2.2 lb = 1 kg)
  • 0.9 kg / 1 lb 15.7 oz (1.982 lb)
  • Author
  • Model page created by Gil Silva. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Transcontinental 3 Band 10 Transistor is part of the collections of the following members.

 Forum