• Año
  • 1982
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 372459

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Pilas + jack (etc.) para alimentación externa.
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Plástico moderno (Nunca bakelita o catalina)
  • de Radiomuseum.org
  • Modelo: Voyager Oscilloscope - Scopex Instruments; Letchworth
  • Forma
  • Portátil > 20 cm (sin la necesidad de una red)
  • Anotaciones
  • Introduced in 1982, the Scopex Voyager was a pioneering battery-portable digital storage oscilloscope employing an LCD matrix display instead of a conventional cathode-ray tube. Contemporary reports described it as the world's first tubeless, dual-trace, digital-storage, battery-portable oscilloscope.

    Developed in collaboration with the Royal Signals and Radar Establishment (RSRE) at Malvern—specifically using the liquid-crystal display addressing method invented by Dr. Ian Shanks and his team, with production supervised by former RSRE collaborator Paul Holland and Scopex engineer P. Waugh—the instrument replaced the conventional high-voltage cathode-ray tube (CRT) with a low-voltage (15 V max) flat LCD panel. This eliminated EHT voltages, making the Voyager suitable for intrinsically safe environments such as coal mines and petrochemical plants.

    Display System

    • Main Screen: 128 × 256 matrix dye phase-change LCD (64 × 102 mm) by an English Electric Valve Co. subsidiary; polarizer-free for wide viewing angles and high contrast in bright light.
    • Drive Method: Pseudorandom bit sequences (PRBS) across 128 rows and 256 columns; matching waveforms turn pixels OFF (dark trace on energized background), reducing temperature sensitivity.
    • Flag Display: Secondary dye phase-change LCD showing operating modes, alias warnings, and low battery (~15 mins before blanking).
    • Display manufactured by the LUCID division of English Electric Valve Co. Ltd.

    Vertical Amplifiers & Digitizer

    • Channels: Dual-trace (IC multiplexer + fast sample-and-hold) with protected low-noise BIFET inputs.
    • Bandwidth: DC–150 kHz (DC coupled, 8 samples/cycle); 3 Hz–150 kHz (AC coupled).
    • Sensitivity & Rise Time: 10 mV/cm to 5 V/cm; 800 ns (single trace), 1.6 µs (dual trace).
    • Input Impedance: 1 MΩ // 22 pF.
    • A/D Conversion: 7-bit at 1.25 MHz max (60 ns min sample period).

    Timebase, Triggering & Storage

    • Internal / External Timebase: 20 µs/cm to 50 s/cm (0.01% accuracy); External 1.25 MHz max (4.75 V / 0.25 V) with X-Y plotter mode.
    • Pre-Trigger & Memory: Selectable ¼, ½, or ¾ pre-trigger capture; 100-day waveform retention in standby RAM when switched off.
    • Controls, Alerts & Accessories: Six storage slide switches, trace "Locate" button, visual/audio alias alarms, and rear peripheral bus (e.g., tape recorder). Supplied with charger and high-impedance probes.

    Power Supply

    • Batteries & Regulation: Internal 6 × C-size rechargeable Ni-Cad cells (5 to 8 hours continuous use) feeding a VMOS FET switch-mode regulator generating -5 V (analogue) and +5 V / +15 V (digital) rails; supplied with external charger.
  • Mencionado en
  • -- Original prospect or advert (Radio & Electronics World (AU), June 1982, pp. 34–35 .)
  • Documentación / Esquemas (1)
  • -- Original prospect or advert (Electronics Today International (UK), July 1982, p. 10)
  • Autor
  • Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum