Integrated Amplifier TA-88

Sony Corporation; Tokyo

  • Année
  • 1972–1976
  • Catégorie
  • Amplificateur BF ou mélangeur BF
  • Radiomuseum.org ID
  • 158380

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de transistors
  • 22
  • Principe général
  • Amplification audio
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110, 127, 220, 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 26 W (36 W max.)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Integrated Amplifier TA-88 - Sony Corporation; Tokyo
  • Forme
  • Modèle de table vertical (pas forme catédrale)
  • Dimensions (LHP)
  • 130 x 230 x 165 mm / 5.1 x 9.1 x 6.5 inch
  • Remarques
  • A HiFi stereo integrated amplifier with output power of 13 watts per channel into 8 ohms. Slider controls for left and right channel volume, bass and treble, rotary selector switch for phono, tuner and aux, push button switches for hi-filter, stereo/mono and tape monitor, indicators for phono, tuner and aux.

    With a jack for headphones, RCA phono sockets for input phono, tuner and aux, for input/output tape, a DIN socket for input/output tape and terminals for 1 pair of loudspeakers.

    Specification  
    Power Amplifier Section  
    Rated output 11 watts per channel both channels driven into 8Ω
    RMS power  18 watts per channel both channels driven into 4Ω
    13 watts per channel both channels driven into 8Ω
    Dynamic power 60 watts both channels driven into 4Ω
    40 watts both channels driven into 8Ω
    Power bandwidth 20Hz-20kHz (IHF)
    Harmonic distortion < 1.0% at rated output (at 1kHz)
    IM distortion < 1.0% at rated output
    Speaker load impedance 4Ω - 8Ω
    Preamplifier Section  
    Frequency response  
    PHONO
    TUNER, AUX, TAPE REC/PB (input)
    RIAA curve ±1.0dB
    15Hz-15kHz ±3dB
    Input sensitivity/impedance  
    PHONO
    TUNER, AUX, TAPE, REC/PB (input)
    3mV/50kΩ
    250mV/50kΩ
    Signal output/impedance  
    REC OUT
    HEADPHONE OUT
    REC/PB (output)
    250mV/10kΩ
    280mV/270Ω
    30mV/80kΩ

    Power requirements
    110, 127, 220, 240V AC 50/60Hz with voltage selector

    Power consumption 80 watts

    Each semiconductor listed once only.

    Matching devices Sony ST-88, Sony ST-88L and Sony SQA-100

  • Poids net
  • 3.2 kg / 7 lb 0.8 oz (7.048 lb)
  • Littérature
  • -- Original prospect or advert (1976 Sony Hi-Fi and Stereo Cassettes catalogue)
  • Schémathèque (1)
  • Selezione Radio-TV Dezember 1972
  • Schémathèque (2)
  • -- Original-techn. papers. (Service Manual TA-88 dated 1972)
  • Auteur
  • Modèle crée par Eduard Abfalterer. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Integrated Amplifier fait partie des collections des membres suivants.

 Forum