Amplifier 2A60

Tektronix; Portland, OR

  • Year
  • 1963
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 206490

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 5
  • Wave bands
  • - without
  • Power type and voltage
  • Powered by external power supply or a main unit.
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Amplifier 2A60 - Tektronix; Portland, OR
  • Shape
  • Chassis only or for «building in»
  • Dimensions (WHD)
  • 4.25 x 6.25 x 14 inch / 108 x 159 x 356 mm
  • Notes
  • The type 2A60 Amplifier module is designed for use with Tektronix Type 560-Series oscilloscopes. It has a bandpass of DC to one megacycle. Sensitivity is adjustable in four calibrated steps from 0.05 volt (50 millivolts) to 50 volts per division of deflection and is continuously variable, uncalibrated, between these steps and up to about 500 volts per division. Accuracy is within 3 percent at each of the calibrated steps. This module has an input impedance of 1 megohm paralleled by 47 picofarads. Maximum allowable input signal is 600 volts (DC plus peak AC).
  • Net weight (2.2 lb = 1 kg)
  • 3 lb (3 lb 0 oz) / 1.362 kg
  • Price in first year of sale
  • 200.00 $
  • Source of data
  • -- Original-techn. papers.
  • Author
  • Model page created by Hank Kaczmarski. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Amplifier is part of the collections of the following members.

 Forum