Calibration Fixture 067-0502-01

Tektronix; Portland, OR

  • Year
  • 1969
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 195386

 Technical Specifications

  • Number of Tubes
  • 2
  • Number of Transistors
  • 7
  • Semiconductors
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 115; 230 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Calibration Fixture 067-0502-01 - Tektronix; Portland, OR
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 229 x 150 x 410 mm / 9 x 5.9 x 16.1 inch
  • Notes
  • The Tektronix Calibration Fixture 067-0502-01 is a Amplitude Calibrator and Comparator. It provides an accurate source for positive and negative DC voltage and current as well as 60 Hz and 1 kHz squarewaves. Amplitudes are available from 0.2 mV to 100 V in a 1-2-5 sequence.
    The comparator provides a means for making voltage measurements by alternately chopping from an accurate reference (internal supply or external input) and from an unknown input, and viewing the resultant signal on an oscilloscope.
    The Amplitude Calibrator and Comparator is intended to be used for verifying the accuracy of [Tektronix] oscilloscope amplitude calibrators.
    Early instruments have the tube 7734 as a voltage regulator in the power supply, later units were equipped with the Compactron tube 6G11. Since the tube socket remains as a noval 9-pin, the Compactron was plugged-in by a special adapter socket.
  • Net weight (2.2 lb = 1 kg)
  • 3.4 kg / 7 lb 7.8 oz (7.489 lb)
  • Mentioned in
  • -- Original-techn. papers.
  • Author
  • Model page created by Bernhard Nagel. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Calibration Fixture is part of the collections of the following members.

 Forum