• Country
• Great Britain (UK)

• Manufacturer / Brand
• Wayne Kerr; New Malden, England

• Year
• 1964 ??

• Category
• Service- or Lab Equipment

• Radiomuseum.org ID
• 338648

Click on the schematic thumbnail to request the schematic as a free document.

• Number of Transistors
• Semiconductors present.

• Semiconductors

• Wave bands
• Wave Bands given in the notes.

• Power type and voltage
• Line / Batteries (any type) / AC: 115; 220 / DC: 12 Volt

• Loudspeaker
• Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)

• Material
• Metal case

• from Radiomuseum.org
• Model: Standard Frequency Receiver RHF-1 - Wayne Kerr; New Malden,

• Shape
• Rack

• Dimensions (WHD)
• 7 x 3 x 13 inch / 178 x 76 x 330 mm

• Notes

• This instrument is suitable for the checking of oscillator calibration to an accuracy of up to one part in 10⁷.
   

  Beat frequencies may be observed by the connexion of oscilloscopes to output terminals provided on the rear of the instrument.

  Operating frequencies are normally 2.5, 5,10,15,20, and 25 MHz, but up to three frequencies between 2.5 and 25 MHz may be added.
  
  The usable sensitivity is 1 µV, and the signal plus noise-to-noise ratio is better than 10 dB at 3 µV input.

  All particular characteristics are in the original attached article.

• Mentioned in
• Electronic Engineering, volume 36, January 1964.

• Author
• Model page created by Pier Antonio Aluffi. See "Data change" for further contributors.

• Other Models

• Here you find 32 models, 31 with images and 15 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
  All listed radios etc. from Wayne Kerr; New Malden, England