• Year
  • 1972 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 353703

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC)
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Various materials
  • from Radiomuseum.org
  • Model: Testmatic T30 - Wayne Kerr; New Malden,
  • Shape
  • Tablemodel, with any shape - general.
  • Notes
  • Testmatic TM30

    Automatic circuit tester, the Testmatic TM30 will perform up to 30 DC measurements automatically on circuit cards.

    If a fault is detected the instrument stops and provides an indication of which test the circuit failed and why it failed (high or low, plus a meter indication). The test sequence and measurement limits (100 kΩ/V) are “hard-wired” on a plug-in programme card which can be changed rapidly.

    The instrument contains two power supplies for the circuit under test which can be set between 5 and 18V (500mA) and can be switched by the programme. The pass tolerance for each test can be set between 2.5 and 45% of the desired value. A complete test sequence takes between 5 and 15 seconds, depending on the exact details of the programme.

    Connection to the board under test can be by plugs, sockets, or spring-loaded probes.

  • Author
  • Model page created by Gary Cowans. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum