radiomuseum.org

AR2volt_MOV

Informazioni - Aiuto 
ID = 57573
       
Stato:
Gran Bretagna (Regno Unito)
Produttore: MO Valve Co. Ltd.; GB
Tipo:  Triodo a vuoto 
  <1925 very rare
Identico a AR2volt_MOV

Zoccolo IS-2 (Interservice, UK 1918)
Utilizzata per Militaire et/ou Services Publics
Filamento Vf 2 Volt / If 0.4 Ampere / Direct
Descrizione Made for the British Army. This base used for this tube was the IS-2. This base was a molded ebonite "box" which had two square contacts on the bottom for the filament and a long side contact on each side for the anode and grid. The square studs measured 3.4mm x 4.7mm. The tube was also made with the IS-4 base (see photos). This was also an ebonite "box", somewhat bigger than the IS-2 base. It had four round stud pins, each 6mm x 7mm diameter. Two were on the bottom for the filament and one on each side for the anode and grid connections. Also made by Ediswan. The designer of these two bases is not known. 
Dimensioni
(LxAxP)
incl.pins/tip
35 x 86 x mm / 1.38 x 3.39 x inch
Bibliografia British Radio Valves - The Vintage Years: 1904-1925   Pages 45 & 86

Collezione di

 
ar2volt_is_2.jpg

AR2volt_MOV
 

[rmxtube-en]
  

Conformità dei dati Ulteriori informazioni