radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

PA210A

Information - Help 
ID = 72497
       
Country:
United States of America (USA)
Brand: Perryman Electric Co., Inc.; North Bergen, NJ
Tube type:  Triode, vacuum   Power/Output 
Identical to PA210A = 210A
First Source (s)
1929 : -- Original prospect or advert

Base UX-Base (4 Pins (2 thick, USA 1924, UX)
Was used by Radio/TV-reception etc.
Filament Vf 4.5 Volts / If 1 Ampere / Direct / Specified voltage AC/DC
Description

The advertisement in "Radio" Nov. 1929, page 61 shows that this tube was fitted with the patented ceramic Perryman Bridge. This was two spacers, one placed between the press and the element base. This had the necessary wires pass through it for sturdiness, insulation and parallel alignment. The second bridge was placed on top of the element structure. In directly heated tubes, the filament was held in place with a tension spring. This element structure would have been expensive to make and it is not known how long this tube variation was commercially available.

 
Dimensions (WHD)
incl. pins / tip
x 137 x 54 mm / x 5.39 x 2.13 inch
Information source Radio (magazine)   November 1929, page 61

uv_triode_tube~~50.png PA210A: Fin Stewart
Fin Stewart


Just Qvigstad
1usa_perryman_radio1929_3~~5.png
PA210A: Manufacturer's Literature 1929
Anonymous 15 Collector

 
perryman_p.a.210_a_tube.jpg

 

You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  

Data Compliance More Information